Realignment - Kenwood TK-5210G Service Manual

TK-5210
1. Modes
User mode
Panel test mode *1
PC mode
Firmware
programming mode
Clone mode *1
Self programming mode *1
Firmware version information *1
Clock adjustment mode *1
Transceiver information mode *1
Mode
User mode For normal use.
Used by the dealer to check the fundamen-
Panel test mode *1
tal characteristics.
Panel tuning mode
Used by the dealer to tune the transceiver.
*1
Used for communication between the trans-
PC mode
ceiver and PC.
Data programming Used to read and write frequency data and
mode other features to and from the transceiver.
Used to check the transceiver using the PC.
PC test mode This feature is included in the FPU.
See panel tuning.
Firmware
Used when changing the main program of
programming
the fl ash memory.
mode
Used to transfer programming data from
Clone mode *1
one transceiver to another.
Self programming Frequency, signaling and features write to
mode *1 the transceiver.
Firmware version Used to confi rm the internal fi rmware ver-
information *1 sion.
Clock adjustment
Used by the dealer to adjust date and time.
mode *1
Transceiver
Used to confi rm the transceiver fi rmware
information mode
version.
*1
*1: K2, K3 and K7 models only
4
( G )

REALIGNMENT

Panel tuning mode *1
Data programming mode
PC test mode PC tuning mode
Function
2. How to Enter Each Mode
Mode
User mode Power ON
Press and hold the [Side3] and [PTT] keys
Panel test mode *2 while turning the transceiver power ON and
then release the [PTT] key fi rst.
PC mode Received commands from PC.
Panel tuning mode
Press the [Side3] key, in Panel test mode.
*2
Firmware Press and hold the [Side3] and [PTT] keys
programming while turning the transceiver power ON and
mode then release the [Side3] key fi rst.
Press and hold the [Side2] and [PTT] keys
Clone mode *2 while turning the transceiver power ON and
then release the [Side2] key fi rst.
Press and hold the [Side2] and [PTT] keys
while turning the transceiver power ON and
Self programming
then release the [PTT] key fi rst.
mode *2
And the "INPUT PASSWORD" is displayed,
then release the [Side2] key.
Firmware version Press and hold the [Side3] key while turning
information *2 the transceiver power ON.
Press and hold the [Orange] and [PTT] keys
Clock adjustment
while turning the transceiver power ON and
mode *2
then release the [Orange] key fi rst.
Transceiver Press and hold the [Side1] and [PTT] keys
information mode while turning the transceiver power ON and
*2 then release the [PTT] key fi rst.
*2: K2, K3 and K7 models only
3. Panel Test Mode
(K2, K3 and K7 models only)
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
(K2, K3 and K7 models only)
Setting method refer to ADJUSTMENT.
Operation