Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Phottix Strato TTL Instructions
Parts
Transmitter
1.Power Switch
2.Test Button
3.USB Port
4.Shutter Button
5.Status LED
6.Lanyard Slot
7.LCD
8.EV -/+ Adjustment Buttons
9.Channel Selection Button
10.HSS / SCS Mode Button / Key Lock button
11.Battery Compartment
12.Hot Shoe Connector
13.Locking Ring
Advertisement
Related Manuals for Phottix Strato TTL
Summary of Contents for Phottix Strato TTL
- Page 1 Phottix Strato TTL Instructions Parts Transmitter 1.Power Switch 2.Test Button 3.USB Port 4.Shutter Button 5.Status LED 6.Lanyard Slot 7.LCD 8.EV -/+ Adjustment Buttons 9.Channel Selection Button 10.HSS / SCS Mode Button / Key Lock button 11.Battery Compartment 12.Hot Shoe Connector...
- Page 2 Receiver 1.Power Switch 2.Channel Selection Switch 3.Test Button 4.USB Port 5.Shutter Button 6.Status LED 7.Lanyard Slot 8.Hot Shoe Port 9.Sync Cable Port 10.Shutter Cable Port 11.DC 5V Power Port 12.Battery Compartment 13.Cold Shoe / 1/4 x20 mount 14.Locking Ring The Transmitter LCD...
- Page 3 Receiver groups will fire if set to the same channel as the Strato TTL transmitter. 3. The Strato TTL Transmitter will not trigger Phottix Odin or Ares. 4. Phottix Odin TCU or Atlas II (in Tx mode) or Ares Transmitter will not trigger Strato TTL Receivers.
- Page 4 1. To turn on the Phottix Strato TTL transmitter or receiver– move the power switch to the “ON” position. 2. To turn off the Phottix Strato TTL transmitter or receiver - move the power switch to the “OFF” position. Test Button 1.
- Page 5 Status LED will flash green once every 2 seconds. 2. The Status LED on the Strato TTL receiver will flash green once every 2 seconds while the power is on and idle. The LED will turn red when a signal is received from the transmitter and the connected flash or camera is fired.
- Page 6 At high shutter speeds the power of flashes is greatly reduced. Supported Camera and Flash Settings The Phottix Strato TTL Trigger supports functions that can be set in camera menus. See your camera and flash manuals for full details. Functions not available on a camera body or flash cannot be used with the Strato TTL system.
- Page 7 When flash zoom is changed from a camera menu the zoom of a flash connected to a Strato TTL Receiver on the same channel as a transmitter will also change correspondingly.
- Page 8 5. Consult your camera manual for specific settings for remote use. 6. The Strato TTL receiver will function as a wired shutter release. The shutter button functions the same as a camera shutter button: A half-press of the shutter button will autofocus, a full press will take a photo.
- Page 9 Operating humidity: 35﹪～95﹪RH FCC Compliance Information For Transmitter Company: Phottix (HK) Ltd. Name: Phottix Strato TTL Flash Trigger Transmitter Model Number: Strato TTL Transmitter FCC ID: P9M-STRATOTTL This device complies with Part 15 of the FCC Rules. Operation is subject to the...
- Page 10 For Receiver This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Strato TTL and is the answer not in the manual?
Questions and answers