Page 2
H-PCKT-MOD A Note from Thor Broadcast about this Manual Intended Audience This user manual has been written to help people who have to use, integrate and to install the product. Some chapters require some prerequisite knowledge in electronics and especially in broadcast technologies and standards.
H-PCKT-MOD HDMI-Modulator J.83B/ATSC/DVB-T/ISDB-T Button Layout HDMI HDMI Signal input CVBS/ CC CVBS or Signal input Power Supply 12V DC 1A Ethernet RJ45 connector for service Micro USB PC connector for service & update RF Out RF Signal output RF In...
H-PCKT-MOD Primary Use This Thor Broadcast H-PCKT-MOD handheld pocket modulator is used to feed audio-video signals through the HDMI or AV connector to inject into an existing coaxial cable network. Signals from surveillance cameras, media-players, satellite receivers or computers are fed through the input then output via RF-modulation and available to any number of receivers (TV, cable set- top-box) over long distances of coax or hybrid fiber/coax infrastructures.
H-PCKT-MOD J.83B Menu Frequency (MHz) Output Frequency Short Name Press OK to edit Major Ch Press OK to edit Minor Ch Press OK to edit Modulation Select 64 or 256QAM RF Attenuation attenuation of the output (0-30dB attenuation>output level 100-70 dBuV)
H-PCKT-MOD DVB-T – Advanced Settings Service Provider alphanumeric Network ID [0000-65535] ONID [0000-65535] TS ID [0000-65535] Service ID [0000-65535] Min BR Minimum bitrate,2000 kbps Max BR Maximum bitrate 24000 kbps Modulation QPSK / QAM16 / QAM64 Fast Fourier Transform Mode 2K / 8K...
Audio PID [32-8190] PCR PID [32-8190] Network Check and set the IP Factory Default Reset to factory settings Packing List Thor Broadcast H-PCKT-MOD 1 PC User's Manual 1 PC HDMI Cables 1 PCS Power Cord 1 PC For Further Tech Support 1-800-521-Thor(8467) support@thorfiber.com...
Need help?
Do you have a question about the H-PCKT-MOD and is the answer not in the manual?
Questions and answers