BIEPI Essential Use And Maintenance Manual page 15

Press the main switch of the machine and then the brewing
switch within a few seconds the water will flow out from
the dispensing spout.
Never press the switch for the supply before
lowering the lever (4).
When the water flows evenly, continue dispensing for at
least 5 seconds;
switch
Raise the lever and wait until the operating temperature is
reached, recognizable after turning off the light signaling
the heating element of the unit.
Lower the lever again, and rerun an extended dispensing
without the pod.
This procedure must be carried out and, if necessary,
repeated when the machine has not been used for a long
period.
then stop dispensing by pressing the