Marcy MWB-1282 Owner's Manual
  1. Manuals
  2. Brands
  3. Marcy Manuals
  4. Fitness Equipment
  5. MWB-1282
  6. Owner's manual

Marcy MWB-1282 Owner's Manual

Smith machine
Hide thumbs

Advertisement

Table of Contents

NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
MWB-1282
Retain This
Manual for
Reference
160825
OWNER'S
MANUAL
MARCY PLATINUM
SMITH MACHINE
MWB-1282

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MWB-1282 and is the answer not in the manual?

Questions and answers

Related Manuals for Marcy MWB-1282

Summary of Contents for Marcy MWB-1282

  • Page 1 NOTE: Please read all instructions carefully before using this product MARCY PLATINUM Table of Contents SMITH MACHINE Safety Notice MWB-1282 Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model MWB-1282 Retain This Manual for Reference 160825 OWNER'S MANUAL...

  • Page 2: Table Of Contents

    WARRANTY....................… 26 ORDERING PARTS..................26 BEFORE YOU BEGIN Thank you for selecting the Marcy PLATINUM SMITH MACHINE MWB- 1282. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction.

  • Page 3: Important Safety Notices

    IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1.
  • Page 4 SAVE THESE INSTRUCTIONS. WARNING LABEL PLACEMENT...

  • Page 5: Smith Machine Hardware Pack

    SMITH MACHINE HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
  • Page 6 CAGE MACHINE HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

  • Page 7: Smith Machine Assembly Instructions

    SMITH MACHINE ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Note: Do not tighten the Nuts and Bolts until instructed to do so. B.) Connect the two Base Frames (#3) by the Cross Brace (#7).
  • Page 8 STEP 2 (See Diagram 2) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Left Upright Beam (#1) to the Left Rear Support (#5) and onto the left Base Frame (#3). C.) Secure it to the Base Frame with two M10 x 4” Allen Bolts (#54), four Ø ¾” Washers (#57), and two M10 Aircraft Nuts (#58).
  • Page 9 DIAGRAM 2...
  • Page 10 STEP 3 (See Diagram 3) A.) Attach two Ø 2 3/8” x 2” Rubber Bumpers (#30) to the holes on the Cross Brace (#7). Insert the two Rear Short Guide Rods (#17) through the two Rubber Bumpers into the holes on Cross Brace.
  • Page 11 DIAGRAM 3...
  • Page 12 CABLE LOOP DIAGRAM...
  • Page 13 STEP 4 (See Diagram 4 & Cable Loop Diagram) A.) Attach the 170” Upper Cable (#25) to the opening on the Front Upper Frame (#14). B.) Attach a Pulley (#33) to the opening. Secure it with one M10 x 4” Allen Bolt (#54), two Ø...
  • Page 14 STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 62” Lower Cable (#26) to the open bracket on the Cross Brace (#7). Attach a Pulley (#33) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#52), two Ø ¾” Washers (#57), one L-shaped Cable Retainer (#24), and one M10 Aircraft Nut (#58).
  • Page 15 STEP 6 (See Diagram 6) A.) Place the Lifting Sleeve (#8) in between the two Safety Stop Frames (#18). Align the holes. Insert the Weight Bar (#13) from outside of one Safety Stop Frame through the Lifting Sleeve to the other Safety Stop Frame on the other side. B.) Turn and attach the two safety catch hooks on the Lifting Sleeve (#8) to the selected slots on the Left and Right Uptight Beams (#1 &...

  • Page 16: Smith Machine Exploded Diagram

    SMITH MACHINE EXPLODED DIAGRAM...

  • Page 17: Smith Machine Parts List

    SMITH MACHINE PART LIST KEY NO. DESCRIPTION Q’ty Left Upright Beam M10 x 1” Allen Bolt Right Upright Beam M10 x 1 ¾” Allen Bolt Base Frame M10 x 4 1/8” Allen Bolt Top Beam M10 x 4” Allen Bolt Left Rear Support M10 x 3 ½”...

  • Page 18: Bench Hardware Pack

    BENCH HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
  • Page 19 BENCH HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

  • Page 20: Bench Assembly Instructions

    BENCH ASSEMBLY INSTRUCTION STEP 1 (See Diagram 1) A.) Attach the Bench Base Frame (#6) to the Rear Stabilizer (#7). Secure the side-holes with two M10 x 4” Carriage Bolts (#41), two Ø ¾” Washers (#31), and two M10 Aircraft Nuts (#33).
  • Page 21 STEP 2 (See Diagram 2) A.) Attach the Main Seat Support (#1) to the Bench Base Frame (#6). Secure it with three M10 x 4” Carriage Bolts (#41), three Ø ¾” Washers (#31), and three M10 Aircraft Nuts (#33). B.) Attach the Front & Rear Seat Bracket (#4 & #5) to Main Seat Support. Secure each Bracket with one M10 x 4”...
  • Page 22 STEP 3 (See Diagram 3) A.) Align the bracket on the Backrest Adjustment Support (#8) in between the two Backrest Supports (#3). Secure it with four M8 x 1 5/8” Allen Bolts (#34), eight Ø 5/8” Washers (#30), and four M8 Aircraft Nuts (#32). Do not tighten the Nuts and Bolts yet. B.) Insert the Backrest Adjustment Support into the opening on the Main Seat Support (#1).
  • Page 23 STEP 4 (See Diagram 4) A.) Attach the Backrest Board (#13) to the Backrest Supports (#3). Secure it with four M8 x 1 5/8” Allen Bolts (#34) and four Ø 5/8” Washers (#30). B.) Attach the Seat Pad (#12) to Front & Rear Seat Bracket (#4 & #5). Secure them with four M8 x 1 5/8”...
  • Page 24 STEP 5 (See Diagram 5) A.) Attach the Leg Developer (#2) to Main Seat Support (#1). Secure it with one M10 x 3 1/8” Allen Bolt (#38), two Ø ¾” Washers (#31), and one M10 Aircraft Nut (#33). B.) Insert two Foam Tubes (#10) halfway through the holes on Leg Developer. Push four Foam Rolls (#16) onto the Tubes from both ends.

  • Page 26: Bench Parts List

    BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty Main Seat Support Leg Developer Backrest Support Front Seat Bracket Rear Seat Bracket Bench Base Frame Rear Stabilizer Backrest Adjustment Support Backrest Adjustment Lever Foam Tube Spring Seat Pad Backrest Board 2 ¾” Grip 2”...

  • Page 27: Warranty

    LIMITED WARRANTY Pure-Tec warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the frame and one year on all other parts and components from the date of purchase. This warranty extends only to the original purchaser. Pure-Tec’s obligation under this Warranty is limited to replacing damaged or faulty parts at Pure-Tec’s option.

Table of Contents