Atlas XENOTEST ALPHA Operating Manual page 56

Operating manual XENOTEST ALPHA / ALPHA HIGH ENERGY
No. Fault
5 Relative humidity can`t be reached
6 Max. BST is reached
7 Program parameter not valid
8 Program for sensorless operation
9 Program for sensor operation
10 Program for use of other filters
11 Program does not exist
12 Water tank empty
13 No water supply for humidifier
14 XENOSENSIV or adapter not fitted
15 Lamp does not ignite
16 Caroussel blocked
17 Chamber door open
18 Lid of set open
19 Chamber temperature too high
20 Overtemperature at top of the lamp
21 Overload in lamp power supply
22 Air circulation at fault
23 Rain failed
24 Humidifier out of action
ALPHA aund HIGH
Safety instructions
ENERGY features
Function Program example
Page 56
Possible measures (Spare part no.)
• Readjust supply valve,
• Water supply for humidifier below 18°C, wait until water
temperature rises during operation,
• Humidifer reached performance limits, limits see chapter 7.4,
figure 38 „humidity diagram".
• Maximum black standard temperature too narrow,
• Check of fan speed,
• Check of irradiance, check XENOSENSIV sensor with Radialux
and calibrate if necessary
• After pressing the ENTER key the error messages 8,9,10 may
appear. If no error message is displayed, re-enter the program.
• Check whether end plug is fitted.
• Check whether XENOSENSIV sensor is fitted.
• Check of the selected filter system and irradiance in the
weathering program.
• Enter weathering program
• Refill water tank
• Readjust supply valve.
• Check whether XENOSENSIV sensor or end plug are fitted.
• Check seat of lamp,
• Check lamp fuses,
• Check lamp age.
• Check sample caroussel.
• Shut test chamber door
• Shut lid of equipment.
• XENOTEST service
• XENOTEST service
• XENOTEST service
• XENOTEST service
• XENOTEST service
• XENOTEST service
Unit set-up Unit description
Setting up tests Care and cleaning
Options und accessory Start-up
List of options and
Maintenance
accessories
ATLAS