Advertisement
JetCount currency counter cleaning procedures
®
Daily cleaning of the JetCount
especially for high-volume applications, as well as for those processing highly circulated (dirty) notes.
Recommended cleaning materials
Simple Green, the recommended cleaning agent, can be an eye irritant. Avoid eye contact.
If eye contact occurs, flush eye(s) with cool water for 5 minutes – remove contact lenses if
present – continue flushing eye(s) with cool water for 15 more minutes. If irritation persists,
consult physician.
Individuals with sensitive skin should rinse hands after using.
■
Simple Green Safety Towels. (Part number: 022-2118-00.)
A pre-moistened microfiber towel also may be used. If using Simple Green concentrate, dilute to: 1 ounce of
Simple Green per 8 ounces of water. For a material-safety-data sheet, see simplegreen.com.
■
Microfiber towels. (Part number: 022-2223-00.)
■
A clean, soft eraser. (Part number: 022-1695-00.)
■
Vacuum. (Part number, standard vacuum: 022-1959-00; part number. heavy-duty vacuum: 022-1308-00.)
Daily cleaning
High voltage inside. Risk of electric shock.
Turn power OFF and unplug power cord from machine before cleaning.
To avoid machine/component damage and potential voiding of existing warranty, follow these
procedures:
Only use specified tools for cleaning machine. Never use metal tools.
If using Simple Green concentrate, dilute to: 1 ounce of Simple Green per 8 ounces of water.
Never use cleaners containing ammonia.
Never spray cleaners directly on machine components.
1.
2.
800 786 5528
currency counter is recommended to ensure maximum productivity and reliability,
®
Turn power OFF (rocker panel to 0).
Disconnect power cord from the back of the JetCount.
Page 1 of 3
cumminsallison.com
Advertisement
Table of Contents
Related Manuals for CUMMINS ALLISON JetCount Series
Summary of Contents for CUMMINS ALLISON JetCount Series
- Page 1 JetCount currency counter cleaning procedures ® Daily cleaning of the JetCount currency counter is recommended to ensure maximum productivity and reliability, ® especially for high-volume applications, as well as for those processing highly circulated (dirty) notes. Recommended cleaning materials Simple Green, the recommended cleaning agent, can be an eye irritant. Avoid eye contact. If eye contact occurs, flush eye(s) with cool water for 5 minutes –...
- Page 2 Remove hopper guide. Remove feeder plate as shown below. Use a microfiber towel to clean the black start sensor at the top, middle of the feeder plate, as identified at left. Use a Simple Green Safety Towel to remove dirt buildup from the upper and lower aluminum rollers. To reach all exposed surfaces, rotate the large, black feed rollers forward (direction of note flow).
- Page 3 Use a microfiber towel to clean the stacker-sensor lens located in the stacker tray between the two gray stacker wheels. Clean the stacker mirror located directly across from the stacker- sensor lens. Stacker-sensor lens Stacker mirror Replace feeder plate. Insert curved edge of feeder plate first. Gently press down on feeder plate until it snaps into position.
Need help?
Do you have a question about the JetCount Series and is the answer not in the manual?
Questions and answers