Cleaning The Water Supply Filter - Toto Washlet GL TCF891G Instruction Manual

Cleaning the water supply filter
● Clean the water supply filter if the water pressure during rear or front washing seems to have
weakened.
1
1
Close the water shut-off valve and stop the water supply.
CAUTION
Do not detach the drain valve with
built-in water filter while the water
shut-off valve is still open.
Prohibited ● Doing so will cause water to spill.
2
2
Drain the water from the Washlet pipes.
(1) Press the
(This drains any remaining water from the Washlet.)
(2) Press the
(The wand returns to its inactive position.)
3
3
Open the cap.
4
4
Detach the drain valve with built-in water filter.
● Use a flat-blade screwdriver to loosen the drain valve
with built-in water filter and pull it out.
button on the remote control.
button again.
Wall-mounted toilet
valve
Water shut-off valve
Turn clockwise
Attachment Hole for the drain valve with built-
in water filter
Drain valve with built-in water filter
Turn anticlockwise
Floor-mounted toilet
valve
Water shut-off valve
Turn clockwise
Cap
Open
Water receptacle
25