Related Manuals for APURO CD400-A
Summary of Contents for APURO CD400-A
- Page 1 Meat Mincer Instruction manual Model: CD400-A CD400-A_A5_v3_20180531.indb 1 2018/5/31 16:57...
-
Page 2: Safety Tips
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. • If the power cord is damaged, it must be replaced by a Apuro agent or a recommended qualified technician in order to avoid a hazard. -
Page 3: Pack Contents
• Cutting blade Apuro prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your Apuro dealer immediately. -
Page 4: Operation
Telephone Helpline: 1300225960 1. Insert the mincing barrel into the motor housing mouth, with the shaft facing upwards [Fig. 1]. 2. Tighten the locking knob [Fig. 2]. 3. Insert the feed screw into the mincing barrel. Turn the screw slightly to slot the base of the screw on to the transmission shaft, if necessary [Fig. -
Page 5: Cleaning, Care And Maintenance
Dry thoroughly. • Lubricate the parts with a little cooking oil before replacing for best performance. Troubleshooting If your Apuro appliance develops a fault, please check the following table before making a call to the Helpline Fault Probable Cause Solution... -
Page 6: Technical Specifications
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Apuro. Every effort is made to ensure all details are correct at the time of going to press, however, Apuro reserves the right to change specifications without notice. -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Equipment Type Heavy Duty Meat Mincer - 250kg/hr Model CD400-A Legislation Electrical Safety Electromagnetic Compatibility Standards IEC 60335-1 (fifth Edition) IEC 60335-2-64:2008 (edition 3.1) EN55014-1:2017 EN55014-2:2015 EN61000-3-2:2014 EN61000-3-3:2013 Producer Name Apuro Producer Address 15 Badgally Road, Campbelltown, NSW 2560 I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and Standard(s). - Page 8 CD400-A_A5_v3_20180531 CD400-A_A5_v3_20180531.indb 8 2018/5/31 16:57...
Need help?
Do you have a question about the CD400-A and is the answer not in the manual?
Questions and answers