Phottix WXD-189RX User Manual

Wireless remote control

Advertisement

Thank you for your purchase of Phottix product and viewing this instruction manual,be sure to read and
understand this manual and the instruction manual of the camera entirely before use,so that you can use it
correctly and expertly.we will spare no effort to add oges to your photograph.you can realize the use method
and precautions easily through this manual.

1.Product description:

Cleon is a remote control with radio frequency,the Working voltage as well as the electric current of the
receiver is low,so it saves power safety,with strong anti interference ability.Smart code setting:Frequency
pre-set in production.so you can use the remote instantly.in case change code in usage,press five times
continuously the Set/ switch on receiver until light blinks,press the shutter button on transmitter one time to
confirm the code.you can do this way to unlimited receivers with one transmitter.the Smart code system has up
to 16,000,000 combination codes ,it can operate within the working distance of 100 meters (without
obstacles)with no interference,In order to adapt to the specific shooting environment.
2.Parts of product:
3.Specification:
1).battery:one CR2 3V battery
2).standby current:1.2mA;Dormancy current:1uA
3).max. distance:100m(without obstacles)
4).frequency:433.92Mhz
5).Receiving sensitivity:-98dBM

4. Operating Instructions:

SET/POWER button
After installing the battery,keep pressing the button for 3 seconds,it is starting up,then keep pressing it for 3
seconds,it is turned off;when it is on,we press it continuously 5 times,then the indicator light blinks,we can have
code setting now,then press the release button on the transmitter to confirm working..
1).use method of wired remote:
①Set to ON position on receiver,take the 2.5mm cable to connect the 2.5mm socket of receiver and the shutter
port of camera.
②Pressing the release button on the receiver manually to autofocus and take photos.
The usage of Long Exposure:switch the receiver to the Hold position,then the camera has long exposure.
2).the usage of wireless remote:
Wireless Remote Control User Manual (WXD-189RX)
: has two fuctions,that is on/off and code setting.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WXD-189RX and is the answer not in the manual?

Questions and answers

Summary of Contents for Phottix WXD-189RX

  • Page 1 Wireless Remote Control User Manual (WXD-189RX) Thank you for your purchase of Phottix product and viewing this instruction manual,be sure to read and understand this manual and the instruction manual of the camera entirely before use,so that you can use it correctly and expertly.we will spare no effort to add oges to your photograph.you can realize the use method...
  • Page 2 ①When the camera is off,switch the receiver to the ON position,take the 2.5mm cable to connect the 2.5mm socket of receiver and the shutter port of camera,after that,turn on the camera and the receiver; ②after the successful code setting,the transmitter can control the receiver,so that it can control the camera's sets,such as single shot mode, 2 seconds delay, continuous, as well as bulb mode for long exposures.

Table of Contents