Turnigy Aquastar ESC 120A Manual

Thanks for purchasing Turnigy
specifically developed to supply stable and strong power for r/c model boats beyond you expected.
Please read the instruction booklet carefully before use.
Warnings
· Strongly recommend to calibrate the throttle range of transmitter when you first use the controller or
when using a new/different transmitter or receiver.
·When connecting the ESC to battery pack, please ensure the polarity is correct. Incorrect polarity may cause
permanent damage to the ESC and such damage is not covered by manufacturer's WARRANTY.
·When you use the ESC, turn on the transmitter BEFORE powering on the receiver.
·When you finish the running, power off the receiver BEFORE turning off the transmitter.
·Changing the PWM may cause the motor to heat ahead of time.
·Never disconnect the battery pack while the motor is running, as this could cause damage to the speed
controller and/or motor.
·Connectors with low conductivity may cause erratic motor rotations or other unexpected
movements.
·If you do not use the BEC function of the ESC and are using a separate receiver pack or UBEC to power
receiver and servos instead, please disconnect the red wire from the ESC's receiver lead.
·The controller will automatically power off the motor if the battery voltage drops below the programmed
cut-off voltage (factory preset at '6.0V').
AQUASTAR ESC speed controllers. Turnigy
®
AQUASTAR ESC are
®