Cleaning and care
Charcoal filters
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Charcoal filters are available to order via
the Miele Webshop, the Miele Spare
Parts Department (see end of this
booklet for contact details) or from your
Miele dealer.
The type of charcoal filter required is
listed under "Technical data" at the
back of this booklet.
Fitting/replacing charcoal filters
The slots for the charcoal filters are
located above above the grease filters.
Remove the cover. It is held in
position by magnets.
Take the charcoal filters out of their
packaging.
Insert the charcoal filters in the slots.
Replace the cover.
44
When to change the charcoal filters
Replace the charcoal filters when
they no longer absorb kitchen odours
effectively.
They should, however, be replaced at
least every 6 months.
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol .
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
To do this, with the fan switched on,
press the operating hours control
twice, then hold it for approx. 3
seconds until only the 1 is flashing.
The Charcoal filter symbol will go
out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
Press the operating hours control
twice and hold it for approx. 6
seconds until only the 1 is flashing.
Disposing of charcoal filters
Used charcoal filters can be disposed
of with the normal household waste.