Connector Panel - Sony Betacam SX DNW-A22 Operation Manual

2-2 Connector Panel

Cooling fan
BREAKER
3 Power supply section
1 COMPOSITE VIDEO OUTPUT connectors
(BNC type)
These output analog composite video signals.
When the CHARACTER switch on the subsidiary
control panel is set to ON, the output from connector 2
(SUPER) has superimposed text information such as
time code, menu settings, and alarm messages.
2 RF ADAPTOR connectors
Connect the optional RFU-89KB RFU Adaptor Kit
when using an ordinary TV set for monitoring video
and audio playback.
3 Power supply section
BREAKER button
AC IN
BREAKER
Ground terminal
AC IN
AC IN connector
1 COMPOSITE VIDEO OUTPUT connectors
2 RF ADAPTOR connectors
RF ADAPTOR
VIDEO OUTPUT
COMPOSITE
1
VIDEO
2(SUPER) DC
AUDIO
MONITOR OUTPUT
R L
RS-232C
5 RS-232C connector
4 MONITOR OUTPUT connectors
AC IN connector
Use the supplied power cord to connect this to an AC
outlet.
BREAKER button
This jumps out if an excess current flows on the
primary side of the AC power circuit.
Ground terminal
Connect this to ground.
4 MONITOR OUTPUT connectors (XLR 3-pin,
male)
According to the setting of the AUDIO MONITOR
SELECT buttons on the upper control panel, two (L
and R) audio monitor signals are output.
5 RS-232C connector (D-subminiature 25-pin)
Use this for monitoring and diagnosis of the state of
this unit from an external computer, using ISR
(Interactive Status Reporting).
Chapter 2 Location and Function of Parts
Cooling fan
2-9