Specifications - Panasonic KXF-E64C Maintenance Manual

SPECIFICATIONS

Item
Mounting angle
Mounting range
Board flow direction
Control system
External memory
Program data
∗1
Power source
Rated capacity
Supply air pressure
Supply air volume
Outside dimension
Mass
∗2
Environmental
condition
Transportation and
storage condition
Altitude
Noise
∗ 1: PT prepares data. This machine can only modify some data.
∗ 2: Mass of the main body excluding the optional units
∗ 3: The power supply for HUB is an option. This power supply is required when you wish to
communicate with PT while the main power supply is OFF.
2
0 ° to 359 ° (It can be set in increments of 0.01°.)
Refer to the Reference Manual.
Refer to the Reference Manual.
Microcomputer system
Data is saved in PT. (Approximately 1 MB is required for saving a piece of data, depending
on the hard disk space of PT.) One type per 3.5-inch floppy disk
Point count: Max. 10000 points
Normal service source: Three-phase 200 ± 10 VAC or 400 ± 20 VAC
Machine body
Frequency: 50/60 Hz
Power source
Single-phase 100 VAC to 240 VAC
for HUB
∗3
Machine body 1.5 kVA (Including a direct tray)
Power source
150 VA
for HUB
0.49 MPa - 0.78 MPa (Downstream from MR unit: 0.49 MPa - 0.54 MPa)
100 L/min (A.N.R)
1260 mm (W) × 2722 mm (D) × 2000 mm (H) (Including PATLITE)
1600 kg (Standard configuration, excluding a collectively-changing truck)
Temperature: 10 ° C to 35 ° C
Humidity: 25% to 60% (No condensation)
Temperature: − 20 ° C to 60 ° C
Humidity: 75% (No condensation)
Less than 1000 m above sea level
< 63 dB (A)
Specifications
E64C-E-MMA00-A01-01