Updating T-Tap Firmware - AJA T-TAP Assembly, Installation And Operation Manual

Thunderbolt to sdi & hdmi mini-converter

Hide thumbs Also See for T-TAP:

Table of Contents

Updating T-TAP Firmware

When you update your T-TAP software by downloading new versions from the

AJA website, it is possible that some versions may also require a firmware update

to update the software stored in non-volatile memory. Always carefully read the

release notes that accompany each version to be installed. The release notes will

spell out all required software and hardware necessary to ensure a successful

update of your T-TAP.

Follow these instructions when a firmware update is required:

1. Connect T-TAP to a computer that has the AJA Software package installed.

2. Open the AJA Control Panel application, then go to the Firmware screen.

3. Select the desired firmware version and click Install.

4. After the install completes, power cycle T-TAP (for example, by unplugging

and reconnecting the Thunderbolt cable.

T-TAP Thunderbolt to SDI & HDMI Mini-Converter v15.1

www.aja.com

Table of Contents

Do you have a question about the T-TAP and is the answer not in the manual?