Panasonic GT Series Manual page 53

* 1 The input in GTWIN is as
follows:
* 2 The input in GTWIN is as
follows:
* 3 The input in GTWIN is as
follows:
* 4 For details, please consult the manual for the PLC you will use.
Usable devices (When the version of GTWIN is 2.95 or older)
There is no restriction on the version of GT firmware if the version of GTWIN is older than Ver2.95.
Bit/Word Device
I/O Relay
Internal Hold Relay
Special Auxiliary Relay
Data link Relay
Bit Device
Auxiliary Memory Relay
Hold Relay
Timer(contact)
Counter(contact)
I/O Relay
Internal Hold Relay
Special Auxiliary Relay
Data link Relay
Auxiliary Memory Relay
Word Device
Hold Relay
Timer(current)
Counter(current)
Data Memory
*For details, please consult the manual for the PLC you will use.
Note:
The maximum value that can be set with the GT is described.
-
The range of usable addresses differs depending on the model. For details, please consult the manual
-
for the PLC you will use.
No.
000000-614315
LR00000-LR19915
AR00000-AR95915
HR00000-HR51115
TIM0000-TIM2047
CNT0000-CNT2047
0000-6143
LR000-LR199
AR000-AR959
HR000-HR511
TIM0000-TIM2047
CNT0000-CNT2047
DM0000-DM9999
2-15