Login Password Recovery Process - Dasan V5824G User Manual

UMN:CLI
The following is an example of changing the current password.
The password you are entering will not be shown in the screen, so please be careful not
!
to make a mistake.
4.1.4

Login Password Recovery Process

To recovery login password to default, perform the following step-by-step instruction:
Step 1
After the V5824G is manually restarted, the booting messages are shown up. Keep on
pressing [Space Bar] key right after "
screen.
Step 2
Enter "password" and press [ENTER] key when the boot process stops for a while next
to "
password (no password). You have to set new password for admin.
Step 3
Verify the "password restore to default..." messages.
62
SWITCH(config)# passwd
Changing password for admin
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:junior95
Re-enter new password:junior95
Password changed.
SWITCH(config)#
" messages. The current password returns to the default setting
[Image OK : os1]
************************************************************
*
* Boot Loader Version 6.26
* DASAN Network Solutions Inc.
*
************************************************************
Press 's' key to go to Boot Mode: 0
[Loading OS1 image ...]
[Image OK : os1]
[Loading OS1 image ...]
Step1 (Keep on pressing [Space Bar]
Step 2
User Manual
V5824G
" is shown up on the
*
*
*
*