Optional Cutting Procedure - Wood-mizer LT70L DH Safety, Setup, Operation & Maintenance Manual

Sawmill Operation
4

Optional Cutting Procedure

4.8 Optional Cutting Procedure
In order to achieve maximum production rates, it may be desirable to leave the blade
engaged when returning the carriage. (Normal operation procedures recommend disen-
gaging the blade before returning the carriage for maximum blade life and fuel economy.)
4-13
DANGER! If leaving the blade engaged for maximum pro-
duction rates, make sure the off-bearer stays out of the path
of the blade. Failure to do so will result in serious injury or
death.
CAUTION! If you choose to leave the blade engaged; raise
the blade to clear the log before returning the carriage. Fail-
ure to do so may cause damage to the blade and/or saw-
mill.
60HDdoc081208 Sawmill Operation