Toshiba Canvio AeroMobile User Manual page 57

Settings Management
56
Using the Settings Management
This window shows the amount of available disk space remaining on
your Canvio AeroMobile Wireless Solid State Drive. If an SD Card is
available, its disk information also is displayed.
Reset to Factory Setting (Web browser only):
1 In the System Settings window click or touch
Settings
(Sample Image) Reset Settings window
2 To restore your Canvio AeroMobile Wireless Solid State Drive
to its original Factory Default settings, move the switch to
ON
the
3 Click or touch the
Upgrade Firmware:
1 In the System Settings window click or touch
Firmware
2 Click or touch the
If new Firmware is available, the following screen appears.
(Sample Image) Upgrade Firmware window
to open the Reset Settings window.
All information stored on the Canvio AeroMobile
Wireless Solid State Drive will be erased during this
formatting process.
Be sure to save your data to another storage device
before executing this procedure.
position.
Save
to open the Upgrade Firmware window.
Online Upgrade
button.
button.
Reset
Upgrade