Welcome Section Congratulations! You have made an excellent choice with the purchase of this quality WORKZONE ® product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supported by the high quality standards of Quesh Ltd.
General Information & Safety Instructions This Moisture Meter is powered by 4 ‘AAA’ batteries. Do not dispose of batteries in your household waste. Please contact your local authority for details on safe disposal. Do not expose this product to damp or moist conditions. •...
Page 5
General Information & Safety Instructions INTENDED USE This product is intended for the non-commercial measuring of moisture in: • Paper • Cardboard • Wood/Firewood • Construction timber • Plaster • Mortar • Concrete The meter will also measure and display the ambient temperature in degrees Celsius or Fahrenheit.
Contents & Features Contents 1 x Moisture Meter 4 x ‘AAA’ Batteries 1 x User Guide Features • Detects moisture levels in wood • Detects moisture levels in masonry • Thermometer • Easy calibration • Auto power off • Low power warning •...
Setting Up Installing The Battery This product is supplied with a 4 ‘AAA’ batteries. To fit the batteries please remove them from the wrapper. Unscrew the locking screw and open the battery bay by lifting the cover up. Insert the ‘AAA’ batteries in to the correct terminal slots. Replace the battery cover by inserting the holding pins first at the bottom of the bay and closing the cover down and replace the locking screw.
Setting Up Turning On/Off To turn the Moisture Meter on, press ‘On/Mode’ button. The meter will turn itself off it is if unused or left in hold mode after 30 seconds. Calibrating Before Use The meter must be calibrated before use. The meter has a calibration terminals marked ‘B’...
Operating Using The Meter After the meter has been turned on and calibrated, place the probes into the material you wish to test and wait a few seconds for the reading to settle before taking a reading. Read the left side of the scale marked with at the top for: •...
Operating Firewood readings of 6%-15% would be ideal for burning. Readings of 16%-20% would be suitable but not ideal and readings of 21%-44% would need to be allowed further drying time before use. Indoor timber readings of 15% would indicate a suspicious area and readings of 20% would indicate possible action would be needed.
Page 14
Warranty Certificate Warranty This product is warranted to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour.
Page 15
Quesh Limited 1800 995 036 www.quesh.co.uk B7, First Business Park First Avenue, Crewe MODEL: 11334 PRODUCT CODE: 11334 01/2019 Cheshire CW1 6BG Phone lines available Monday to Friday 9am - 5pm. Call cost local rate per minute from a landline,...
Need help?
Do you have a question about the 11334 and is the answer not in the manual?
Questions and answers