Table of Contents
Advertisement
Quick Links
Thank you very much for purchasing PIAA product.
Please read this entire manual before installation and use of this product.
※ The
cautionary points related to the installation of the product.
To ensure safe and secure installation of the product, please follow these points closely.
To user
To shop owners installing the product
Please read the cautionary points before installation to ensure safe utilization of the product.
● Do not touch the bulb while lit or immediately after switching it off because the lamp remains extremely hot. Severe burns may
occur as a result. Also, care should be taken to prevent water from making contact with the lens.This may cause the lens to
crack or impair proper functioning.
● The lamp becomes very hot when turned on. When parking your car near flammable items such as dried leaves, turn off the
lamp as it may cause a fire.
● Do not look directly into the light for long periods. Doing so may cause eye irritation or visual impairment.
● The lamp and the switch harness are intended for automobile use. Do not use for any other purpose.
● This lamp is intended for use in rain (day or night), during foggy or snowy conditions where visibility is hampered.
Do not use during normal driving conditions.
● Do not operate the switch while driving.
● If the lamp is kept on when the engine is not running, it may drain the battery.
● Make sure the lamp is installed securely before driving the vehicle. If an abnormality is found, adjust it immediately.
● Check for any loose screws that hold the lamp in place before driving. If you find any loose screws or bolts (if a bracket is
used), tighten them securely. If you notice a loose part while driving, inspect the section immediately and make the necessary
adjustments.
● Avoid repeatedly turning the lamp off and on as it may reduce the overall life of the bulb.
● Some of vehicles are produced high voltages of electric charge when you start engine. Avoid loading extra voltage to lamps,
please turn the switch off when you start engine.
● Avoid needless disassembly of the lamp or the switch harness as it may cause it to fail.
● If the lamp and/or the switch harness is removed and set aside for safekeeping, wipe away all dust or grime and store in an
place free of moisture.
● If the lens is cracked or damaged in any way, verify whether there is any damage to the harness or the switch harness that it is
connected to. If there is any damage to the cord covering, replace it immediately.
● Avoid injury when replacing the harness and the switch harness. Please dispose of it as a non-combustible item.
Installation Instructions
and
... Please keep this manual and a receipt which can be recognized the
shop name you bought at.
When giving this product to a third party, always include this manual
together with the product.
... After installation of the product, make sure the customer is provided
with this owner s manual.
LP530
marks indicated in this manual are
-1-
PKI-0007-3
Advertisement
Table of Contents
Related Manuals for Piaa LP530
Summary of Contents for Piaa LP530
- Page 1 PKI-0007-3 LP530 Installation Instructions Thank you very much for purchasing PIAA product. Please read this entire manual before installation and use of this product. ※ The and marks indicated in this manual are cautionary points related to the installation of the product.
- Page 2 PKI-0007-3 Please read the installation procedures thoroughly beforehand. ● This lamp is a hanging type and uses a bracket. If using it upright, set the bracket up correctly so that the PIAA logo is properly displayed. ● In order for the lamp to perform at its full potential, use relay harnesses manufactured by PIAA.
- Page 3 PKI-0007-3 Product Details ※ Verify all the parts are included. If a part is missing, please contact your local distributor. ① Lamp main unit (2 units) ② Switch harness set [1 set] switch ③ Double-stick tape (2 pcs) ④ One-touch connector (1pc) ⑤...
- Page 4 PKI-0007-3 ● When using a bracket available on the market, make sure the bolts you remove from the vehicle does not hinder its performance. ● Do not install on an unstable location, it may come lose while driving. This may affect the overall life of the bulb. In addition it may damage the vehicle or the main body of the lamp.
- Page 5 PKI-0007-3 Switch...
- Page 6 ● After installation, avoid excess speeds and do not wash for 1 to 2 days. ● If applied incorrectly, a special double-sided adhesive tape is available at your local PIAA dealer. ◆ If using screws(M4 bolt or screw) to fix lamp stably.
- Page 7 PKI-0007-3 DRIVING ／ Spot Light Aiming Typically, driving lights are mounted above the front bumper about 14 cm -30 inches from the ground to provide extra high beam illumination. Driving lights can be mounted below the bumper, although they will not be as effective because the light will hit the ground sooner and reduce the range of the light.
- Page 8 PKI-0007-3 2 If the bulb suddenly fails to light up … → Check the fuse located on the vehicle s wiring system. If it is burned out, replace accordingly. → Check the fuse for the switch harness. If it is burned out, follow instructions indicated in [ 3 Fuse replacement Procedures].
Need help?
Do you have a question about the LP530 and is the answer not in the manual?
Questions and answers