Error Messages - ALDI Ambiano User Manual

Table top dishwasher
Hide thumbs Also See for Ambiano:
Table of Contents

Advertisement

Error messages

The dishes are not
dried.

Error messages

Error message
E1
E4
38
Unsatisfactory drying results
The dishes were not
arranged correctly.
Not enough rinse aid
The dishes were removed
too soon.
Incorrect program
selected
Meaning
Water cannot be
pumped in.
The appliance
overfl ows/leaks.
Rinse aid empty
Regeneration salt
container empty
Arrange the dishes as
described in chapter "Arranging
the dishes and cutlery".
Use more rinse aid./Replenish
the rinse aid compartment.
Do not remove the dishes
immediately after the program
is fi nished.
Open the door slightly so that
vapour can escape.
Remove the dishes while they
are still slightly warm.
The temperature is lower
in programs with a short
runtime. Select a program with
a longer runtime and higher
temperature.
Possible reason/remedy
Open the water inlet or increase the
water pressure if the water inlet is not
fully open.
Make sure that the door is closed
correctly and that the water inlet and
outlet are connected correctly.
Turn off the water supply.
If water is on the appliance base due
to overfi lling, remove the water before
restarting the dishwasher.
Replenish rinse aid.
Replenish regeneration salt container

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ambiano and is the answer not in the manual?

Questions and answers

Ebo
January 26, 2025

My ambiano blender keeps showing err

User image 6796680155ac0
1 comments:
Mr. Anderson
February 10, 2025

The Ambiano Portable Blender has built-in safety features that may cause it to show an error if certain conditions are not met. Possible reasons include:

1. Jug Not Securely Attached – The blender will not turn on unless the jug is firmly screwed onto the base.
2. Start Button Not Pressed Correctly – The start button must be pressed twice to activate the blender.
3. Defective Unit – Some users have reported defects developing after a short period of use, which may require repairs.

Check these factors to troubleshoot the issue. If the problem persists, the unit may need repair or replacement under the three-year warranty.

This answer is automatically generated

Tricia
March 2, 2025

Soap will not desolve

User image 67c48f4020161
Sarah Herron
April 22, 2025

No water is going in to dishwasher and cycle light is flashing?

User image 6807e8fe25fa6

Table of Contents

Save PDF