Ningbo Siterwell Electronics GS522C User Manual

Smoke Alarm User Manual
larm User Manual
Model number: GS522C
Thank you for purchasing our smoke alarm. Please take a
few minutes to read the user's manual thoroughly and few minutes to read the user's manual thoroughly and
familiarize yourself and your family with its operation. And familiarize yourself and your family with its operation. And
save it for future reference.
Diagram 1
Product Specifications:

POWER: built-in DC3V(Panasonic CR
battery (battery not replaceable)

OPERATION CURRENT:<8uA (standby)
(alarm)

ALARM VOLUME: >85 dB (A) at 3 mete

ALARM SENSITIVITY: 1.9-2.52%/ft OBS

SILENCE TIME: approx. 10 minutes

SMOKE ALARM SOUND PATTERN: Temporal 3 SMOKE ALARM SOUND PATTERN
BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s
pause 1.5s, with the red LED flash, repeat this alarm pause 1.5s, with the red LED flash, repeat this alarm
pattern.

COMPLY WITH: UL217 &CAN/ ULC
Description:
This unit is a photoelectric smoke alarm. The
technology, it is more sensitive in detecting slow smolder
fires which generate light smoke, little heat and may smolder
for hours before bursting into flames. This smoke alarm
not contain any radioactive material. Smoke
installed in every room (except the bathroom and kitchen), installed in every room (except the bathroom
finished attics and basements, making sure the people in the
home will be able to hear and respond to the alarm sound. home will be able to hear and respond to the alarm sound.
For minimum protection, you should install
every level of the home particularly outside sleeping rooms he home particularly outside sleeping rooms.
Each alarm should be placed in the middle of the ceiling of be placed in the middle of the ceiling of
each room to be protected. Typical single storey dwelling
installation recommendations: Install a smoke alarm on the
ceiling or wall inside each bedroom and in the hallway
Ref Ref：ST522C
alarm. Please take a
CR-2/3AZ) Lithium
(standby), <70mA
at 3 meters.
2.52%/ft OBS
pause 0.5s – BI 0.5s –
ULC-S531
The photoelectric
detecting slow smoldering
little heat and may smolder
smoke alarm does
alarms should be
, making sure the people in the
install an alarm on
Typical single storey dwelling
Install a smoke alarm on the
om and in the hallway
outside each separate sleeping area. If a bedroom area outside each separate sleeping area. If a bedroom area
hallway is more than 30 feet long, install a smoke alarm at hallway is more than 30 feet long, install a smoke alarm at
each end. If there is a basement: install a smoke alarm on the each end. If there is a basement: install a smoke alarm on the
basement ceiling at the bottom of the stairwell at the bottom of the stairwell. Typical
multi-storey dwelling installation recommendations:
minimum of one smoke alarm on each occupiable level of the minimum of one smoke alarm on each
home. Install a smoke alarm on the ceiling Install a smoke alarm on the ceiling or wall inside
each bedroom and in the hallway outside each separate each bedroom and in the hallway outside each separate
sleeping area. If a bedroom area hallway is more than 30 feet sleeping area. If a bedroom area hallway is more than 30 feet
long, install a smoke alarm at each end install a smoke alarm long, install a smoke alarm at each end install a smoke alarm
at the top of a first – to- second floor stairwell.

Important Safety Information:

ety Information:
1. The test button accurately tests smoke alarm functions. Do he test button accurately tests smoke alarm functions. Do
not use any other test method. Test smoke alarm weekly to not use any other test method. Test smoke alarm weekly to
ensure proper operation.
2. If you're sure it isn't a really alarm, open windows or fan If you're sure it isn't a really alarm, open windows or fan
the air around smoke alarm r around smoke alarm to test and silence it.
3. User to install this product need User to install this product needs to comply with all local
and national electrical installat and national electrical installation and building codes.
4. This smoke alarm is designed to This smoke alarm is designed to be used inside a single
family home only. In multifamily buildings, each only. In multifamily buildings, each
individual living unit should have its own smoke alarms. individual living unit should have its own smoke alarms.
Do not install in non-residential buildings
alarm is not a substitute for a complete alarm system. alarm is not a substitute for a complete alarm system.
5. Install a smoke alarm in every room and on every Install a smoke alarm in every room and on every level of
the home. Smoke may not reach the smoke alarm for many the home. Smoke may not reach the smoke alarm for many
reasons. For example, if a fire starts in a remote part of the reasons. For example, if a fire starts in a remote part of the
home, on another level, in a chimney, wall, roof, or on the home, on another level, in a chimney, wall, roof, or on the
other side of a closed door, smoke may not reach the smoke other side of a closed door, smoke may not reach the smoke
alarm in time to alert household members. A smoke alarm ime to alert household members. A smoke alarm
will not promptly detect a fire except in the area or room in will not promptly detect a fire except in the area or room in
which it is installed.
6. Smoke alarm may not alert every household member every Smoke alarm may not alert every household member every
time. The alarm horn is loud in order to alert individuals to time. The alarm horn is loud in order to alert individuals to
a potential danger. However, there may be some ial danger. However, there may be some
circumstances where a household member may not hear the circumstances where a household member may not hear the
alarm (i.e. outdoor or indoor noise, sound sleepers, drug or alarm (i.e. outdoor or indoor noise, sound sleepers, drug or
alcohol usage, the hard of hearing, etc.). If you suspect that alcohol usage, the hard of hearing, etc.). If you suspect that
this smoke alarm may not alert a hous this smoke alarm may not alert a household member, install
and maintain specialty smoke alarms. Household member and maintain specialty smoke alarms. Household member
must hear the alarm's warning sound and quickly respond must hear the alarm's warning sound and quickly respond
to it to reduce the risk of injury, or death that may result to it to reduce the risk of injury, or death that may result
from fire, if a household member is hard of hearing, install f a household member is hard of hearing, install
special smoke alarms with lights or vibrating devices to
alert occupants.
7. Smoke alarms can only sound their alarms when they Smoke alarms can only sound their alarms when they
detect smoke or detect combustion particles in the air. They detect smoke or detect combustion particles in the air. They
- 1 -
Document NO.:RD-522D-39-001
installation recommendations: Install a
second floor stairwell.
residential buildings as this smoke
with lights or vibrating devices to
Version: B Date :20160909