ITALFARAD PFC144evo Operating Manual

ITALFARAD PFC144evo Operating Manual

Automatic power factor controller
Hide thumbs Also See for PFC144evo:
Table of Contents

Advertisement

Available languages

Available languages

Regolatore automatico del fattore di potenza
Automatic power factor controller
PFC144evo
Manuale operativo
Operating manual
ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy
Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com
1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PFC144evo and is the answer not in the manual?

Questions and answers

Summary of Contents for ITALFARAD PFC144evo

  • Page 1 Regolatore automatico del fattore di potenza Automatic power factor controller PFC144evo Manuale operativo Operating manual ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 2 Deve essere marchiato come il dispositivo di interruzione dell’apparecchio: IEC/ EN 61010-1 § 6.11.2.1. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 3: Table Of Contents

    Schemi di collegamento Inserzione trifase standard Inserzione monofase Inserzione su MT Disposizione morsetti Dimensioni meccaniche e foratura pannello Caratteristiche tecniche ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 4: Introduzione

    Introduzione Il regolatore PFC144evo è stato progettato incorporando lo stato dell’arte delle funzioni richieste per le applicazioni di rifasamento. Realizzato con un contenitore dedicato, di dimensioni estremamente compatte, il regolatore PFC144evo unisce il moderno design del frontale alla praticità di montaggio e alla possibilità di espansione sul retro, dove è...
  • Page 5: Funzione Dei Tasti Frontali

    Automatico ventilazione Stato Modo uscite Manuale Stato step Display principale Allarme Barra attivo grafica Display Display alfanumerico secondario ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 6: Modi Operativi 06 T

    è stata accettata e che verrà eseguita non appena possibile. Icona modo Step inseriti Tot kvar Indicazione inseriti in selezione manuale Seleziona step Commuta stato step ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 7: Modo Automatico Aut

    ( kVAR) maggiore del 50% dello step più piccolo. Misure  Il regolatore PFC144evo fornisce una serie di misure visualizzate sul display alfanumerico, in abbinamento al cos attuale che rimane sempre visualizzato sul display principale.  Premendo il tasto è...
  • Page 8 THD tensione THDV Distorsione armonica % totale (THD) della tensione dell’impianto. VH02… Contenuto armonico % dal 2.0 al 15.mo ordine …VH15 ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 9 ❶ Queste misure sono visualizzate solo se la funzione Aggiustamento potenza step è abilitata (P.25=ON) e la password avanzata è abilitata ed inserita. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 10: Blocco Tastiera

    Tentando di eseguire le suddette operazioni, il display visualizzerà LOC per indicare la condizione di blocco. Espandibilità  Grazie al suo bus di espansione, il regolatore PFC144evo può essere espanso con due moduli aggiuntivi  I moduli di espansione supportati dal regolatore PFC144evo si dividono nelle seguenti categorie: ...
  • Page 11: Porta Di Programmazione Ir

    (precedentemente impostati) dal regolatore PFC144evo al disco del PC e viceversa.  Il trasferimento dei parametri da PC a PFC144evo può essere parziale, cioè solo i parametri dei menù specificati. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 12: Impostazione Dei Parametri (Setup) Dal Pannello Frontale

    Se la password è corretta verrà visualizzato OK U oppure OK A a seconda se la password è di livello utente o avanzato. Le password si definiscono con P.22 e P.23. Di default sono impostate a 001 e 002. La password avanzata 002 non è disponibile se il regolatore è installato su un quadro ITALFARAD. ...
  • Page 13  Mentre un parametro è selezionato, con se ne può impostare il valore. Indietro Avanti Incrementa/decrementa ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 14: Impostazione Rapida Ta

    Rammentiamo che, per i soli dati di set-up modificabili da tastiera, è possibile fare una copia di sicurezza (backup) nella memoria eeprom del regolatore PFC144evo. Questi stessi dati all’occorrenza possono essere ripristinati (restore) nella memoria di lavoro. I comandi di copia di sicurezza e ripristino dei dati sono disponibili nel Menu comandi.
  • Page 15: Tabella Dei Parametri

    0.50 Ind – 0.50 Cap P.20 Lingua messaggi di allarme ENG / ITA / FRA / SPA / POR / DEU ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 16 50 Hz = fissa a 50 Hz 60 Hz = fissa a 60 Hz Var = variabile, misurata continuamente ed adattata. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 17 P.19 – Setpoint (valore da raggiungere) del cos. Valore utilizzato in applicazioni standard. P.20 - Lingua dei messaggi di allarme scorrevoli. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 18: Menu Avanzato

    P.51 Formato dati 8 bit – n P.52 Bit di stop P.53 Protocollo Modbus RTU Modbus RTU / Modbus ASCII ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 19 P.34 – P.35 – Dati del TV eventualmente utilizzato negli schemi di collegamento. P.36 – Unità di misura temperatura. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 20 OFF, ha priorità P.45. P.55...P.60 - Funzione dei relè di uscita 9...14. Vedere descrizione P.11 ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 21 P.94 – Come P.61, per allarme A12. P.95 – Come P.62 per allarme A12. P.96 – Come P.63, per allarme A12. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 22: Allarmi

    Il reset degli allarmi è automatico quando scompaiono le condizioni che li hanno generati.  In seguito al verificarsi di uno o più allarmi, il regolatore PFC144evo ha un comportamento dipendente dalla impostazione delle proprietà degli allarmi attivi. Descrizione allarmi...
  • Page 23: Propietà Di Default Allarmi

    Client = Stabilisce connessione verso server remoto F.05...F.07 – Coordinate per la connessione al server remote quando F.04 è impostato su client. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 24: Menu Comandi

     La chiavetta WI-FI oltre a fornire la funzionalità di collegamento WI-FI con PC, Tablet o Smartphone ha anche la possibilità di poter memorizzare e trasferire un blocco di dati da e per il regolatore PFC144evo .  Inserire la chiavetta WI-FI nell’apposita sede sul fronte del regolatore PFC144evo.
  • Page 25: Installazione

    SETUP CX02 DEVICE Copia le impostazioni del setup dalla chiavetta al regolatore PFC144evo CLONE DEVICE CX02 Copia setup e dati di lavoro (dal regolatore PFC144evo alla chiavetta) CLONE CX02 DEVICE Copia setup e dati di lavoro dalla chiavetta al regolatore PFC144evo...
  • Page 26: Schemi Di Collegamento

    Per inserzione trifase, l’ingresso voltmetrico deve essere connesso tra due fasi; il T.A. di linea deve essere inserito sulla rimanente fase.  La polarità dell’ingresso amperometrico è ininfluente. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 27: Inserzione Monofase

    P.03 = L1 Impostazione parametri P.05 = L1-N P.24 = 1PH NOTE IMPORTANTE!  La polarità dell’ingresso amperometrico è ininfluente. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 28: Inserzione Su Mt

    P.03 = L1 P34 = Primario VT1 Impostazione parametri P.05 = L2-L3 P35 = Secondario VT1 P.24 = 3PH ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 29: Disposizione Morsetti

    Disposizione morsetti ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 30: Dimensioni Meccaniche E Foratura Pannello

    Dimensioni meccaniche e foratura pannello (mm) ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 31: Caratteristiche Tecniche

    50A per 1 secondo ± 1% (0,1…1,2In) ±0,5 digit Accuratezza misura Autoconsumo <0,6VA Precisione misure 0,5% f.s. 1digit Tensione di linea ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 32 Sezione conduttori (min e max) Dati d’impiego UL Sezione conduttori (min e max) 0,75...2.5 mm² (18-12 AWG) Coppia di serraggio 0,56 Nm (5 LBin) ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 33 Sezioni cavi: 0,25...1.5 mm² flessibile o rigido Coppia di serraggio dei terminali della morsettiera: 0,18Nm  Alimentazione ausiliaria prelevata da un sistema con tensione fase-neutro ≤300V ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 34  It must be marked as the disconnecting device of the equipment: IEC /EN 61010-1 § 6.11.2.1. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 35 Wiring diagram Standard three-phase wiring Single-phase wiring MV wiring Terminals position Mechanical dimensions and front panel cutout (mm) Technical characteristics ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 36: Introduction

    Introduction The PFC144evo automatic power factor control unit has been designed to offer state-of-the-art functions for power factor compensation applications. Built with dedicated components and extremely compact, the PFC144evo combines the modern design of the front panel with practical installation and the possibility of expansion from the rear, where one expansion module can be slotted.
  • Page 37: Front Keyboard

    Automatic Cooling fan Output mode status capacitive mode status Main Step display status Active graph alarm Secondary Alphanumeric display display ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 38: Operating Modes

    Connected mode steps icon Manual step Tot kvar inserited in selection enabled Select step Change step status ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 39: Aut Mode 39 E

    50% of the smallest step, and the measured cosø is different from the setpoint. Measures  The PFC144evo controller provides a set of measurements displayed on the alphanumeric display, in conjunction with the current cosø that is always displayed on the main display. ...
  • Page 40  These measures are shown only if the Step trimming function is enabled (P.25=ON) and the advanced password is enabled and entered. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 41: Keypad Lock

    By attempting to conduct the above operations, the display will view LOC to indicate the locked keypad state. Expandability  Thanks to expansion bus, the PFC144evo can be expanded with two expansion series module.  The supported expansion modules can be grouped in the following categories: ...
  • Page 42  When the PFC144evo regulator is powered on, it automatically recognises the expansion module that have been mounted.  The expansion modules provide additional resources that can be used through the dedicated setup menus.  The setup menus related to the expansions are always accessible, even if the expansion modules are not physically fitted.
  • Page 43: Ir Programming Port

     This programming port has the following advantages:  You can configure and service the PFC144evo regulator without access to the rear of the device or having to open the electrical panel.  It is galvanically isolated from the internal circuits of the PFC144evo regulator, guaranteeing the greatest safety for the operator.
  • Page 44: Parameter Setting (Setup) From Panel

    After having entered the password, repeat the procedure to access the parameter setting.  Press to select the desired submenu (BAS ADV ALA ... ) that is shown on the alphanumeric display. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 45  While a parameter is selected, with you can increase/decrease its value. Backward Decrement/increment Forward ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 46: Rapid Ct Setup

    N.B.: a backup copy of the setup data (settings that can be modified using the keyboard) can be saved in the eeprom memory of the PFC144evo regulator. This data can be restored when necessary in the work memory. The data backup 'copy' and 'restore' commands can be found in the Commands menu.
  • Page 47: Parameter Table

    0.50 Ind – 0.50 Cap Alarm messages P.20 ENG - ITA - FRA - SPA - POR - DEU language ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 48 P.09 - Minimum time that must elapse between the disconnection of one step and the subsequent reconnection both in MAN or AUT mode. During this time the number of the step on the main page is blinking. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 49 A01 ... A12= The relay is energized when the alarm specified is active. P19 - Setpoint (target value) of the cosø. Used for standard applications. P20 - Language of scrolling alarm messages. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 50: Advanced Menu

    Minimum voltage alarm threshold OFF / 60..110 P.43 THD V alarm threshold OFF / 1..250 P.44 THD I alarm threshold OFF / 1..250 ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 51 P.56 Step 10 function P.57 Step 11 function P.58 Step 12 function P.59 Step 13 function P.60 Step 14 function ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 52 P.34 – P.35 – Data of VTs eventually used in the wiring diagrams. P.36 – Unit of measure for temperature. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 53 P.44 – Maximum installation current THD alarm threshold beyond which the alarm A05 voltage too low is generated. P.45 – Maintenance interval in hours. When it is elapsed, the alarm A12 Ordinary maintenance will be generated. The hour count increments as long as the device is powered. (**) If the controller is installed on the ITALFARAD cabinet P.46 –...
  • Page 54: Alarm Menu

    P.94 – Like P.61 for alarm A12. P.95 – Like P.62 for alarm A12. P.96 – Like P.63 for alarm A12. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 55: Alarms

    Alarms are automatically resetted as soon as the alarm conditions that have generated them disappear.  In the case of one or more alarms, the behaviour of the PFC144evo regulator depends on the properties settings of the active alarms. COD ALLARME DESCRIPTION In automatic mode, all the available steps are connected but the cosø...
  • Page 56: Default Alarm Properties

    Client = Estabilishes a connection to the remote server F.05...F.07 – Coordinates for the connection to the remote server when F.04 is set to client. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 57: Commands Menu

    Makes a backup copy of user setup parameters settings. SETUP RESTORE Usr. Reloads setup parameters with the backup of factory settings. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 58: Wi-Fi Dongle Udage

     The WI-FI dongle offers WI-FI access point capability for connection to PC, Tablet or Smartphone. In addition to this function it also offer the possibility to store and transfer a block of data from/to the PFC144evo regulator.  Insert the interface WI-FI into the IR port of PFC144evo regulator on the front plate.
  • Page 59: Installation

    Installation  PFC144evo regulator is designed for flush-mount installation. With proper mounting, it guarantees IP54 front protection.  Insert the device into the panel hole, making sure that the gasket is properly positioned between the panel and the device front frame.
  • Page 60: Wiring Diagram

    For three-phase connection, the voltage input must be connected phase to phase; the current transformer must be connected on the remaining phase.  The polarity of the current/voltage input is indifferent. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 61: Single-Phase Wiring

    P.03 = L1 Parameter setting P.05 = L1-N P.24 = 1PH NOTES IMPORTANT!  The polarity of the current/voltage input is indifferent. ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 62: Mv Wiring

    P.03 = L1 P.34 = VT1 primary Parameter setting P.05 = L2-L3 P.35 = VT1 secondary P.24 = 3PH ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 63: Terminals Position

    Terminals position ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 64: Mechanical Dimensions And Front Panel Cutout (Mm)

    Mechanical dimensions and front panel cutout (mm) ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 65: Technical Characteristics

    Overload capacity +20% Ie Overload peak 50A for 1 second Accuracy of measurement ± 1% (0,1…1,2In) ±0,5 digit 0.6VA Power consumption ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 66 Maximum pollution degree Overvoltage category Measurement category Climatic sequence Z/ABDM (IEC/EN 60068-2-61) Shock resistance 15g (IEC/EN 60068-2-27) Vibration resistance 0.7g (IEC/EN 60068-2-6) ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 67 Flat panel mounting on a Type 1 enclosure  Auxiliary supply connected to a line with a phase-neutral voltage ≤300V ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...
  • Page 68 PFC144evo operating manual Rev.:01 - Data: 05-2015 ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com...

Table of Contents