Initialization (Reset) - Fujitsu UTY-TFNXZ1 Setting Manual

7
Select the SSID of the wireless router you
are connecting to.
Input the wireless router (WLAN Access
Point) password then press [Connect
device].
8
LED 1 and 2 will both flash 2 times, and a
message will appear when setup is com-
plete.

5. INITIALIZATION (Reset)

Initialize (reset) this product in the following situations:
- Changing the wireless router
- Disposing this product
- Transferring this product to a third party
■ Unregister the air conditioner
Unregister the air conditioner by using the mobile app. (Refer to the operation
manual of the mobile app for details.)
■ Initialization of the WLAN adapter
*Lighting pattern:
1
Press and hold the Setting button for 10 seconds.
2
The initialization will be complete when all LED lamps
flashes 3 times simultaneously (on/off at 0.5-second
intervals).
LED 1 will flash. (on/off=2sec/0.5sec)
After 60 seconds, the LED lamps will return to the original
lighting pattern. (LED1: on, LED 2: on/off=2sec/2sec)
Off On Flashing
Select the WLAN
Access Point
password
Home AP

XYZ AP
Connect device
ABC123
Registration
Successful!
LED1: On
LED2: 2sec/on
Enter
(2 times)
2sec/off
En-13