Related Manuals for Monoprice 27773
Summary of Contents for Monoprice 27773
- Page 1 MONOPRICE Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 27773 User's Manual...
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS AND GUIDELINES ............................3 INTRODUCTION ........................................ 4 FEATURES ..........................................4 CUSTOMER SERVICE ....................................4 PACKAGE CONTENTS ....................................5 REQUIRED TOOLS ......................................9 PRODUCT DIMENSIONS ..................................10 INSTALLATION CONSIDERATIONS ..............................11 INSTALLATION ........................................ 12 SPECIFICATIONS ......................................22... -
Page 3: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES The maximum temperature at the front of the fireplace mantle should never be more than 110°F (43°C). The fireplace mantle should not extend more than 16" (406mm) from the mounting surface. This mount can support displays weighing between 40 ~ 154 lbs. (18 ~ 70 kg). ... -
Page 4: Introduction
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-... -
Page 5: Package Contents
PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. Item Size Magnetic spirit level 15x15x40 Philips pan head screw... - Page 6 Handle Hook Wallboard Connecting rod Front panel Bracket Wall panel cover...
-
Page 9: Required Tools
REQUIRED TOOLS The following tools are required for installation. The following tools are not required, but are highly recommended. -
Page 10: Product Dimensions
PRODUCT DIMENSIONS... -
Page 11: Installation Considerations
INSTALLATION CONSIDERATIONS Warning! Ensure that the mounting surface can safely support the combined weight of the assembled mount and installed display. The bracket installation step requires two people. 1. The temperature at the front of the fireplace mantle must never exceed 110°F (43°C). 2. -
Page 12: Installation
4. This mount is intended for flat screen televisions (LCD, LED, Plasma) only. The mounted television should be between 55 ~ 100" and weigh between 40~ 154 lbs. (18 ~ 70 kg). 5. The vertical space above the mantle must be greater than the height of the wallboard. - Page 13 2. Use a stud finder to locate the studs closest to the centerline. Use a sharp awl or finishing nail to locate the edges of each stud, then mark the centerline of the two studs. Installation Considerations 3. Refer to the table in step 5 in the section above.
- Page 14 4. (Optional) Route the power and video cables through the wall and feed the ends through the hole in the centerline. 5. Place the magnetic spirit level (A) on top of the wallboard (CC), then place the wallboard against the wall, with the mounting holes over the drilled pilot holes. Thread the four hex bolt screws and washers (L) into the pilot holes, then screw them into the studs using an appropriately sized socket wrench, while ensuring that the mount is level.
- Page 15 7. Using the four Allen pan head screws (J) and the hexagon wrench (N), secure the bracket and front panel assembly to the wallboard.
- Page 16 8. (Optional) Route the video and power cables along the bracket, then secure them in place using the cable ties (N), as shown.
- Page 17 9. Place a towel or blanket on a flat surface, then place your television face down on it. Attach the hooks (BB) to the back of the television using the appropriate screws, washers, and/or spacers. The proper combinations to use are the Philips pan head screws (B) and washer 1 (F), Philips pan head screw (C) and washer 1 (F) and spacer (G), Philips pan head screw (E) only, or Philips pan head screw (E) and spacer (G).
- Page 18 10. Using the two Philips pan head screws (I), attach the connecting rod (DD) to the hooks (BB). Then, using the four Philips pan head screws (H), attach the handle (AA) to the connecting rod.
- Page 19 11. Using two people, lift the television and hang the hooks on the front panel. Then use a Philips screwdriver to tighten the two locking screws on each bracket, which secures the brackets to the front panel.
- Page 20 12. Attach the wall panel covers (GG) to the wallboard.
- Page 21 13. Adjust the spring pressure to balance the weight of the display so that it can be easily moved and will maintain its position using either a ratchet wrench or the hexagon wrench (O) provided. 14. If you want to adjust the tilt, loosen the tilt lock lever, adjust the tilt to the desired angle, then tighten the tilt lock lever.
-
Page 22: Specifications
15. Connect the video and power cables to your television. Congratulations, your television is now mounted and ready for use! SPECIFICATIONS Model 27773 Display Size 55" ~ 100" Minimum Display Weight 40 lbs. (18 kg) Maximum Display Weight 154 lbs. (70 kg) Minimum VESA®...
Need help?
Do you have a question about the 27773 and is the answer not in the manual?
Questions and answers