Set DAC Output
Loop Test
(HART only)
Note: Loop
must be
removed from
Set DAC Normal
Automatic
Control
<Return>
Poll Address
Final Assy Num
Show Date
HART
Params
(HART only)
Year
Month
Day
Write Date
Revision 8
This selection allows you to force the DAC
output to any value between 3.8 and 20.8mA.
Note: This selection will put the DAC into
Fixed Output Mode.
This selection allows the loop to be returned
to its Normal mode (Automatic Control) after
performing the Trim operation.
##
###
Yes
No
# # # #
January -
December
# #
Press Enter to write the HART Date to the transmitter.
SLG 700 SmartLine Level Transmitter User's Manual
0 (default) to 63
Asset tracking number
If Yes selected HART Date
Options will be visible and
can be configurable
Enter the current year.
Select the current month.
Enter the day of the month.
Press to enter menu
selection
Scroll to Set DAC
Normal
Press Enter to initiate
and to select
number.
to enter and shift to
next digit
Press to enter menu
selection. Scroll to Set
DAC Normal
Press to initiate
Press to enter menu
selection. and to
select number.
to enter and shift to
next digit
Page 113