Kenwood WD-K10 Series User Manual page 9

1 INTRODUCTION
1.7 System Configuration
System Configuration Table
No. Model Name
1 WD-K10PBS Portable Base
2 WD-K10TR Transceiver
3 WD-K10BS Base Station
4 KSC-48CR Charger
5 KSC-44SL AC Adapter
6 WD-UB110 Battery Pack
7 WD-UB100 Battery Pack
8 EMC-13 Clip Microphone with
Earphone
9 EMC-14 Clip Microphone with
Earphone
10 KHS-37 Headset
11 WD-RC100 Interface Cable
(Universal type)
12 WD-RC50 Interface Cable (2-Pin type) A conversion cable for the Portable base WD-K10PBS.
Product Name
It is a transceiver for wireless communication as a base unit or sub
unit of the DECT intercom system.
It is a transceiver that is the sub unit of the DECT intercom system. It
communicates wirelessly with the Portable Base or Base Station.
It communicates with the transceiver.
A charger for the Portable Base WD-K10PBS/Transceiver WD-
K10TR.
An AC adapter for the charger.
A battery pack for the Portable Base WD-K10PBS.
A battery pack for the Transceiver WD-K10TR.
A clip microphone that is equipped with earphone.
A clip microphone that is equipped with earphone.
A headset for the Portable Base WD-K10PBS/Transceiver WD-
K10TR.
A conversion cable for the Portable base WD-K10PBS.
It is used when performing the PMR Link function.
It is used when performing the PMR Link function.
Remarks
Contents
8