Chapter 7: Customer Programming Software (Cps); Programming The Radio To Cps; Cps Basic Menu Instructions - Motorola DTR600 User Manual

Customer Programming
Software (CPS)
To program or change a feature, a CPS is needed to be
installed in a computer.
CPS allows to program on features such as Direct Call,
Radio Menu Options, Private Groups, Direct Contacts, and
Channel Announcement. It gives you the flexibility to
disable some options such as Factory Reset and Advanced
Configuration to prevent the radio features to be
accidentally modified by users. You are allowed to set up a
password for profile radio management on your CPS for
security purpose.
The CPS software is available for download as free at:
http://www.motorolasolutions/DTR600
www.motorolasolutions/DTR700.
8
You only need to select the Radio Type, if you want to open a new or pre-determined profile. The CPS is smart
enough to determine what model it is reading.

Programming the Radio to CPS

CPS Basic Menu Instructions

and http://
1 To connect the radio to the Customer Programming
Software (CPS), place the radio into the Single Unit
Charger (SUC).
2 Connect the CPS Programming Cable one side to
the SUC and another to the computer.
3 Turn the switch on the CPS Programming Cable to
the Flash position.
1 Open the CPS software and click on the RADIO top
tab.
2 Do one the following:
• Click on the READ tab to read the radio
English
8
43