Table of Contents
Advertisement
7. Z2 Firmware Update
Updated Z2 firmware may from time to time be made
available for download from Z2's support section of
the Bowers & Wilkins website.
8. Z2 Factory Reset
Z2 has a pin-hole reset button located on its rear
connection panel. The reset button is illustrated in
Diagram 7. To return the Z2 network settings (AirPlay
input) to the factory defaults, ensure the power cable
is connected, and power the Z2 on. Press and hold
the reset button for 2 seconds. The indicator will
flash red twice.
9. Cleaning Z2
Use a clothes brush or vacuum cleaner with nozzle
attachment to clean the grille cloth. Wipe other
surfaces with a clean lint-free cloth. If you wish to
use a cleaning agent, apply it onto the cleaning
cloth, not directly onto the Z2. Test a small area first,
as some cleaning products may damage some of
the surfaces. Avoid products that are abrasive, or
contain acid, alkali or anti-bacterial agents.
10. Troubleshooting
If you need help troubleshooting a specific problem,
or have a question you'd like answered, please
consult our Troubleshooting guide, or Frequently
Asked Questions section on the Z2 Product
Support page of our website.
www.bowers-wilkins.com/support
Z 2
B&W Group Ltd. Worthing England
Designed in the UK Made in China
RESET
Diagram 7
Z2 factory reset
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Z2 and is the answer not in the manual?
Questions and answers
Is it possible to connect the speaker to a phone / wifi without an ethernet cable?
Yes, the Bowers & Wilkins Z2 speaker can connect to a phone or Wi-Fi without using an Ethernet cable. It supports wireless network connections via Apple AirPlay and can stream audio from an iPhone, iPad, or iTunes over Wi-Fi.
This answer is automatically generated