Auxiliary Output; Sag1021 Waveform Generator; Probes - SIGLENT SDS5000X Series User Manual

SDS5000X Series Digital Oscilloscope User Manual

7.3.5 Auxiliary Output

When Pass / Fail is enabled, the port outputs the pass / fail signal, otherwise it
outputs the trigger indicator.
See the chapter "Pass/Fail " for more details.

7.3.6 SAG1021 Waveform Generator

Activate the SDS-5000X-FG option and connect the SAG1021 USB function /
arbitrary waveform generator module to any USB host pot on the oscillosc ope.
The oscilloscope can now control the USB module to output specified
waveforms.
＞
Press the WaveGen button on the front panel or touch the screen Utility
AWG Menu to set the waveform.

7.3.7 Probes

The SDS5000X series oscilloscope supports active probe and passive
probes. The specifications and documents of the probe can be obtained at
www.siglent.com.
W W W. S I G L E N T. C O M
2 5 / 2 3 6