Table of Contents
Advertisement
User Manual
Making the measurement settings
from the measurement screen.
If you want to start measuring immediately after making
the measurement settings, we recommend taking the
following steps.
c
Important:
❏ While identifying a GPS, make sure you are
outside with no obstructions overhead, and
try to keep the device as still as possible.
❏ It usually takes less than two minutes to
complete GPS positioning. If it takes more
than two minutes and Failed is displayed, we
recommend selecting Cancel, moving to a
different location, and trying again.
Operation buttons
A
Display the Menu.
Press D on the time screen.
B
Select Measurement .
Use C/D to select, and then press A.
Note:
If you want to start measuring immediately, or if
GPS positioning takes too long, you can skip the
GPS positioning step.
"Skipping GPS positioning" on page 28
Settings
C
Display the Measurement menu.
Press D on the measurement screen.
D
Select Measurement set..
Use C/D to select, and then press A.
E
Select the setting items.
Use C/D to select, and then press A.
F
Select the setting value.
Use C/D to select, and then press A.
Depending on the item, you might have to make
further settings. Follow the on-screen
instructions.
Note:
When setting a number, hold down C/D to speed
through the numbers.
G
Complete the settings.
Hold down A.
The measurement screen is displayed.
70
Advertisement
Table of Contents
