Troubleshooting; Part Numbers; Processmate T10 Temperature Controller; Compatible Nozzle Heaters - Nordson EFD ProcessMate T10 Operating Manual

ProcessMate T10 Temperature Controller

Troubleshooting

This troubleshooting table covers the most commonly encountered issue. If the table does not help you correct the
issue, contact Nordson EFD.
Problem
Heater not working

Part Numbers

ProcessMate T10 Temperature Controller
Part #
7825171

Compatible Nozzle Heaters

Use only the following Liquidyn nozzle heaters. When using other types of heaters, a fault-free operation cannot be
guaranteed. The warranty claim expires.
Part # Description
7825154 Nozzle heater kit, small, M5, straight plug
7825155 Nozzle heater kit, small, M5, 90-degree plug
7825149 Nozzle heater kit, standard, M5, straight plug
7825150 Nozzle heater kit, standard, M5, 90-degree plug
Nozzle heater kit, large, M5
NOTE: This larger heater element heats the material
7825222
farther up into the supply tubing, allowing more
fluid to be heated before it is dispensed.
7825153 Nozzle heater element, small, M5
7825148 Nozzle heater element, standard, M5
7825152 Nozzle heater element, standard, M8
20 www.nordsonefd.com info@nordsonefd.com
Possible Cause
Current limit for the power
supply (via external power
cable) set too low
Cable not connected
Description
ProcessMate T10 temperature controller
800-556-3484
Corrective Action
Ensure that the current limit does not impede
the current.
Ensure that the heater cable is properly
connected and secure.
CAUTION
Material
n/a
n/a
n/a
n/a
n/a
Aluminum
Aluminum
Aluminum
Sales and service of Nordson EFD dispensing systems are available worldwide.
Item
The kit includes the heater
element, retaining nut, plug,
O-ring, and heater key.