After Working Inside Your Computer; Screw List - Dell Latitude 3300 Owner's Manual

2 Bend your knees. Do not bend at the waist.
3 Tighten stomach muscles. Abdominal muscles support your spine when you lift, offsetting the force of the load.
4 Lift with your legs, not your back.
5 Keep the load close. The closer it is to your spine, the less force it exerts on your back.
6 Keep your back upright, whether lifting or setting down the load. Do not add the weight of your body to the load. Avoid twisting your
body and back.
7 Follow the same techniques in reverse to set the load down.

After working inside your computer

After you complete any replacement procedure, ensure that you connect external devices, cards, and cables before turning on your
computer.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries
designed for other Dell computers.
1 Connect any external devices, such as a port replicator or media base, and replace any cards, such as an ExpressCard.
2 Connect any telephone or network cables to your computer.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
3 Connect your computer and all attached devices to their electrical outlets.
4 Turn on your computer.

Screw List

The following table shows the screw list and the images for Latitude 3300, for different components and locations.
Table 35. Screw Size List
Component
• Touchpad Frame to palmrest
• System board to Palmrest
• I/O Board to palmrest
• LCD Panel to back cover
• Touchpad Frame to palmrest
• Mis trigger Bkt to SSD
Bracket
Hinges to LCD back cover
Touchpad to Palmrest
Hinges to palmrest
• LCD Bezel to back Cover
• Fan to Palmrest
• DC-in Bracket to MB
58 Disassembly and reassembly
Quantity
• 3
• 2
• 1
• 4
• 3
• 2
4
3
6
• 2
• 2
• 1
• 1
Screw type
M2.0*2.0
M2.0*3.0
M2.5*3.5
M2.0*3.0 (large head)
M2.5*5.0
M2.0*4.0
Image