Table of Contents
Advertisement
User Manual
D A T A
D A T A
A S S U R E D
A S S U R E D
3.0
Remember to save your PIN in a safe place. If lost or forgotten, there is no way to access the
datAshur Personal
2
If you are having difficulty please refer to this complete user manual loaded on your datAshur Personal
and is also
2
available at iStorage's website:
www.istorage-uk.com/support
#1
www.istorage-uk.com
Advertisement
Table of Contents
Related Manuals for iStorage Datashur Personal2
Summary of Contents for iStorage Datashur Personal2
- Page 1 Remember to save your PIN in a safe place. If lost or forgotten, there is no way to access the datAshur Personal If you are having difficulty please refer to this complete user manual loaded on your datAshur Personal and is also available at iStorage’s website: www.istorage-uk.com/support www.istorage-uk.com...
- Page 2 the...
-
Page 3: Table Of Contents
24. Booting from the datAshur Personal ..................18 25. How to configure the datAshur Personal with Windows OS ........... 18 26. How to configure the datAshur Personal with Mac OS ............21 27. Technical Support ........................22 28. Warranty and RMA information ....................22 www.istorage-uk.com... -
Page 4: Introduction
Please plug in the datAshur Personal to a powered USB port for 60 minutes to fully charge the battery. Thank you for purchasing the iStorage datAshur Personal , a highly secure and easy to use, hardware encrypted USB 3.0 ®... -
Page 5: Datashur Personal Layout
Personal is unlocked in blinking together indicates that both User and Admin & Admin mode PINs have been set on the datAshur Personal Blue Blue Solid flickering together & Connected to a USB port Awaiting Admin PIN change www.istorage-uk.com... -
Page 6: How To Use The Datashur Personal
• For “Password” you would press the following keys: 7 (pqrs) 2 (abc) 7 (pqrs) 7 (pqrs) 9 (wxyz) 6 (mno) 7 (pqrs) 3 (def) • For “iStorage” you would press: 4 (ghi) 7 (pqrs) 8 (tuv) 6 (mno) 7 (pqrs) 2 (abc) 4 (ghi) 3 (def) Using this method, long and easy to remember PIN’s can be created. -
Page 7: How To Enable Options As User
LED changing to Green solid LED 3. Press the KEY button once indicating successful User PIN entry Green Blue LED’s blinking together 4. Press the KEY button 3 times - triple & click awaiting new instructions in OPTIONS mode. www.istorage-uk.com... -
Page 8: How To Enable Read-Only As User
4. Press KEY button once USB port a solid Green LED indicates the drive is Read/Write enabled Once activated, access is restored to the default Read/Write state. Note: Admin can override User Read/Write settings by enabling/disabling Read/Write in Admin mode. www.istorage-uk.com... -
Page 9: How To Set The Timeout Lock In User Mode
4. Press KEY button once Blinking Green 5. Within 10 seconds begin to press the number 0 button Green LED continues to blink twice (double click) (zero,zero)-(00) Green LED becomes solid - Timeout Lock has 6. Press the Key button once been disabled www.istorage-uk.com... -
Page 10: How To Determine The Device Version Number In User Mode
The Admin PIN can be used to override all User settings PIN requirements: • Must be between 7-15 digits in length • Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3) • Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1) www.istorage-uk.com... -
Page 11: How To Unlock The Datashur Personal As Admin
Creating a new User PIN in Admin mode will become necessary if the datAshur Personal has been unlocked for any reason with the Admin PIN, as this will automatically clear the User PIN. To create a new User PIN in Admin mode please follow the instructions on the table below. www.istorage-uk.com... -
Page 12: How To Change The Admin Pin
Green 6. Press KEY button twice (double-click) LED indicating successful Admin PIN change Note: If a mistake was made while defining a new Admin PIN or the procedure was not completed, the drive will retain the old Admin PIN. www.istorage-uk.com... -
Page 13: How To Verify Whether An Admin/User Pin Has Been Set Up
Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we highly recommend that a new User PIN be created immediately once the drive has been unlocked using the Admin PIN. Refer to section 13 on page 11. www.istorage-uk.com www.istorage-uk.com... -
Page 14: How To Determine The Device Version Number In Admin Mode
For example, if the revision number is ‘1.9’, the LED will blink once (1) and the Green LED will blink nine (9) times. Once the sequence has ended the Red, Green & Blue LED’s will blink together once and then to flickering Green LED. www.istorage-uk.com www.istorage-uk.com... -
Page 15: How To Set The Timeout Lock In Admin Mode
00 = 0 minutes (default) Green LED continues to blink 01 = 1 minute 99 = 99 minutes etc LED changes to flickering Green. Timeout Lock 6. Press the Key button once has been set. Admin can override USER Timeout Lock www.istorage-uk.com www.istorage-uk.com... -
Page 16: How To Disable The Timeout Lock In Admin Mode
LED’s continue to blink 5. Within 10 seconds begin to enter your Admin PIN again alternately solid LED to & Green solid LED’s to a 6. Press KEY button once Green flickering LED indicating that all data has been deleted www.istorage-uk.com www.istorage-uk.com... -
Page 17: Brute Force Hacking Detection
User PIN. Also, since this will force the creation of a new encryption key, the datAshur Personal will have to be reformatted (see section 24 or 25). Caution: Resetting the datAshur Personal will delete all data stored on the drive. www.istorage-uk.com... -
Page 18: Booting From The Datashur Personal
LED fades out to complete the reset process (7 & 24. Booting from the datAshur Personal iStorage datAshur Personal USB drives are equipped with a boot delay feature in order to accommodate power cycling during a host boot process. There may be occasions where you might want to boot from the datAshur Personal for various reasons. - Page 19 2. In the Computer Management window under the Disk Management tab, the datAshur Personal recognised as a removable device in raw format. 3. In the blank area under the unallocated section right click Removable Raw Drive and select Format. www.istorage-uk.com...
- Page 20 6. The procedure will finish formatting and return to the Disk Management window. While the datAshur Personal is formatting the BLUE LED will start flashing. When finished, the BLUE LED becomes solid and your datAshur Personal is ready for use. www.istorage-uk.com...
-
Page 21: How To Configure The Datashur Personal
4. Click on the datAshur Personal on the left side of the Disk Utility window. 5. Choose Erase from the contextual menu on the right side of the window. 6. Select MS-DOS for the Volume Format. 7. Click Erase. www.istorage-uk.com... -
Page 22: Technical Support
DAMAGED OR RENDERED DEFECTIVE: 1. AS A RESULT OF ACCIDENT, MISUSE, NEGLECT, ABUSE OR FAILURE AND/OR INABILITY TO FOLLOW THE WRITTEN INSTRUCTIONS PROVIDED IN THIS INSTRUCTION GUIDE: 2. BY THE USE OF PARTS NOT MANUFACTURED OR SOLD BY ISTORAGE; 3. BY MODIFICATION OF THE PRODUCT; OR 4. AS A RESULT OF SERVICE, ALTERNATION OR REPAIR BY ANYONE OTHER THAN ISTORAGE AND SHALL BE VOID. - Page 23 A S S U R E D D A T A A S S U R E D Copyright © 2016 iStorage Limited. All rights reserved. iStorage Limited, iStorage House, 13 Alperton Lane Perivale, Middlesex. UB6 8DH, England Tel: +44 (0) 20 8991 6260 | Fax: +44 (0) 20 8991 6277 e-mail: info@istorage-uk.com | web: www.istorage-uk.com...
Need help?
Do you have a question about the Datashur Personal2 and is the answer not in the manual?
Questions and answers