Transferring Application Programs And Configuration Data; Factory Reset; Using The Programming Button On The Device; Using The Website Of The Device - ISE Sonos Product Manual

7.5

Transferring application programs and configuration data

After programming the physical address, the application program, parameter settings and group ad-
dress connections can be transferred to the device.
A connection to the device can be further established via IP or KNX for this purpose.

For this purpose, select "Programming application program". The download lasts approx. 15
seconds with a direct IP connection or about 2 minutes if using TP.

After the download, please wait approx. 15 seconds while the device copies the data and in-
stalls the application.

Commissioning is complete.
7.6

Factory reset

The following physical KNX address is factory pre-set: 15.15.255
Following the factory reset, the device behaves as in the state of delivery. The device is unconfigured.
This can be recognized after starting up the device from the slowly flashing green APP LED (5).

Using the programming button on the device

The device can be reset to the factory settings through a sequence during start-up.

Make sure that the device is switched off.

Press and hold programming button (1) and switch on the device.

Press and hold programming button (1) until the programming LED (4), the RUN LED (5) and
the KNX LED (6) flash slowly simultaneously.

Briefly release the programming button (1), then press and hold it again until the programming
LED (4), the RUN LED (5) and the KNX LED (6) flash quickly simultaneously.

The factory reset is being carried out; release programming button.

The device need not be restarted following a factory reset.
The factory reset can be cancelled at any time by interrupting the sequence.

Using the website of the device

The factory reset can also be triggered from the website of the device.

Call up the website of the device. For this purpose, double-click the icon of the device in the
Other Devices area in the network environment.

Alternatively, you can also enter the IP address of the device in your browser.

Select Device Status in the upper menu bar on the website.

Select Factory Reset in the upper menu bar on the status page.

Confirm the factory reset when the security prompt appears.

The next displayed page, Factory Reset, indicates that the factory reset is being carried out. As
soon as this is complete, the start page is loaded again.
Order No. 1-0001-002
ise smart connect KNX Sonos
Commissioning
Product Manual Page 56 (76)