Related Manuals for Mueller Ultra M99S
Summary of Contents for Mueller Ultra M99S
- Page 1 ULTRA KETTLE MODEL M99S 110-120V 50/60Hz 900-1100W 4005297 INSTRUCTION MANUAL FOR HOUSEHOLD USE ONLY...
- Page 2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed: Read all instructions. When reading, please refer to the page of illustrations to relate the pictures and test. The appliance should be used strictly in accordance with these instructions. Do not touch hot surfaces.
- Page 3 SHORT CORD INSTRUCTIONS HOUSEHOLD USE ONLY A short power cord or a detachable power cord is provided to reduce the risks of resulting from becoming entangled in or tripping over a longer cord accidentally. Longer detachable power cords or extension cords are available any may be used if care is exercised in their use.
- Page 4 SAFETY INSTRUCTION • Always remain vigilant when the appliance is on, and in particular be careful of the steam coming out of the spout, which is very hot. • Also be careful as the body of kettles becomes very hot during operation. Only touch the handle of the kettle.
- Page 5 TO OEPN THE LID, ACCORDING TO THE MODEL • Hinged lid: press if necessary on the locking system and pull backwards. • Assisted opening lid: press on the locking system and the lid lifts automatically • Automatic opening lid: press the button at the top of the handle •...
- Page 6 THE KETTLE WILL SWITCH OFF AUTOMATICALLY As soon as the water reaches boiling point or the chosen temperature. You can stop it manually, before removing it from its base to pour the water. Depending on the model, the interior light and the indicator light will go out when the water reaches boiling point.
- Page 7 IN THE EVENT OF PROBLEMS THERE IS NO EVIDENT DAMAGE TO YOUR KETTLE • The kettle does not work or stops before coming to the boil • Check that your kettle is properly connected. • The kettle has been switched on without water or an accumulation of scale has caused the overheat cut-out to operate: allow the kettle to cool and ll it with water.
- Page 8 ULTRA KETTLE 412 N. Main St, Ste 100 Buffalo, WY 82834, USA 4005297 Telephone: (888)-632-9981 E-mail: support@muellerdirect.com...
Need help?
Do you have a question about the Ultra M99S and is the answer not in the manual?
Questions and answers
kettle will not turn on
The Mueller Ultra M99S kettle may not turn on for the following reasons:
1. It is not properly connected to the power source.
2. It has been switched on without water, triggering the overheat cut-out. Let it cool, fill it with water, and try again.
3. An accumulation of scale has caused the overheat cut-out to activate. Descale the kettle first, allow it to cool, then restart it.
If the issue persists or if the kettle has visible damage, it should be taken to an authorized service center for repair.
This answer is automatically generated
Mueller M99S fails to auto turn off at a full boil
The Mueller Ultra M99S may not auto turn off at a full boil if it has been switched on without water or if an accumulation of scale has caused the overheat cut-out to activate. To fix this, allow the kettle to cool, descale it if needed, fill it with water, and switch it on. It should start working again after about 15 minutes.
This answer is automatically generated
the Mueller M99S electric kettle switch will not stay in the on position
The Mueller Ultra M99S electric kettle switch may not stay in the "on" position due to the following reasons:
1. No Proper Connection – Ensure the kettle is properly connected to the power source.
2. Overheat Cut-Out Activated – If the kettle was switched on without water or has an accumulation of scale, the overheat protection may have activated. Let the kettle cool, descale it if necessary, refill it with water, and try again after about 15 minutes.
3. Damage – If the kettle has been dropped, leaks, or has visible damage to the power cord, plug, or base, it should be returned to an authorized service center for repair.
If the issue persists, the kettle may need servicing.
This answer is automatically generated
Where would the scale be formed if any and how to clean it ?
Scale forms inside the kettle and on the removable filter. To clean the kettle, unplug it, let it cool, and wipe it with a damp sponge. Do not immerse it in water or use scouring pads. To clean the filter, rinse it under running water if wet or brush it gently if dry. If scale does not detach, the filter needs descaling.
This answer is automatically generated