Recommended Cables; Analogue Loops, Conventional Sounders And Data Loops; Limitations - Global Fire JUNO NET Installation Manual

JUNO NET - NETWORKABLE ADRESSABLE PANEL

RECOMMENDED CABLES

Analogue Loops, Conventional Sounders and Data Loops

The JUNO-NET can be installed as either a self-contained or a distributed system. The self contained system does not require external
data loop connections. The distributed system requires a 4-core data loop cable for connection to remote sub-panels and Repeaters.
The data loop connects the Main Panel to the first Sub-panel and then to the second Sub-panel, etc., and eventually returns to the
Main Panel.
Fire rated Cables for Loops and Sounder Circuits
AEI type Firetec Multicore Ref. F1C1 (1 mm ) to F1C2.5 (2.5 mm ) in 2 core
AEI type Firetec Armoured Ref. F2C1 (1.5 mm ) to F2C2.5 (2.5 mm ) in 2 core
AEI type Mineral Insulated Cable (all types up to 2.5 mm
BICC types Mineral Insulated twin twisted conductor cables, Ref. CCM2T1RG and CCM2T1.5 RG
BICC types Mineral Insulated Pyrotenax (all types up to 2.5 mm )
CALFLEX type Calflam CWZ 2 core type up to 2.5 mm
PIRELLI type FP200 Gold 2 core type from 1 mm to 2.5 mm
FIRETUF (OHLS) FTZ up to 2.5 mm . Manufactured by Draka
All cables must be screened.
Minimum detection loop conductor section size is 0.5 sq.mm
Maximum detection loop conductor section size is 2.5 sq.mm
There should only be one analogue detector loop per shielded cable.
Analogue detector loops and conventional sounders should not run in the same shielded cable.
If the system requires one or more repeaters, it will be necessary to use a four core data cable to create a data loop between the panel
and the repeater. Alternatively, it is possible to use multi-mode dual-core fibre-optic cable or a TCP/IP connection for the same
purpose.
Data loop cable should be RS422/485 grade data cable, eg:
Signal cables for RS485 Communication Links (twisted pair) to Repeater panels
12 AWG Signal 88202 Belden 9583 WPW999
14 AWG Signal 88402 Belden 9581 WPW995
16 AWG Signal 88602 Belden 9575 WPW991
18 AWG Signal 88802 Belden 9574 WPW975
FIRETUF FDZ1000 by Draka 2 core
PIRELLI type FP200 Gold 2 core
PIRELLI type FP-PLUS
Fibre Optic: Multi.mode Dual Core sheathed fire proff with 62,5µ/125µ fibre terminated in ST connectors

LIMITATIONS

A fire alarm system can provide early warning of a developing fire but it does not assure protection against damage or loss
resulting from a fire.
The fire alarm system should be designed and installed in accordance with all relevant regulations and codes of practice.
To ensure maximum protection the system should be regularly tested and inspected by qualified fire alarm installation personnel.
Inspection and testing should be carried out in accordance with the appropriate local standards.
Manufacturers of Fire Detection Equipment
2
2
2
2
2
2
globalfire.pt
INSTALLATION & COMMISSIONING MANUAL REVISION 4.0 05/2013
2
2
2
2
19