Adjusting The Time - VDO MTCO 1324 Operating Instructions Manual

Adjusting the time

• The function TIME ADJUSTMENT may
only be selected if the vehicle is sta-
tionary.
• For an automatic synchronisation of
the chart carrier and the time, the
ignition has to be switched on and
there must not be any chart inserted
in the MTCO.
1. Select the TIME ADJUSTMENT via
2. Activate the minutes counter via
the minutes start to flash.
3. Depress
or
value is being displayed.
4. Activate the hours counter via
start to flash.
5. Depress
or
value is being displayed.
When exceeding or undershooting 12 p.m.,
the date will be adjusted automatically.
6. Acknowledge the time adjustment by
depressing the
seconds. The basic display will then be shown
again.
Comment
If you adjust the time while a chart is inserted, the
error symbol will be shown in the display and the
time will be flashing. The MTCO will remind you to
update the chart carrier settings; ➥ see page 16.
© Continental Automotive GmbH
or
key until the desired
, the hours
key until the desired
key for more than 2
= Depress key shortly
= Depress key for a longer interval
.
,
13