Set The Clock And Date; Set The Initial Settings - Kenwood KDC-BT730DAB Instruction Manual

GETTING STARTED
2

Set the clock and date

1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9 Turn the volume knob to select [DATE SET], then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month
11
Press and hold to exit.
To return to the previous setting item, press
3

Set the initial settings

1 Press B SRC repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to select an item (see the following table), then
press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
4
ENGLISH
Day Year
.
.
[AUDIO CONTROL]
[SWITCH PREOUT] (Applicable only if [X'OVER] is set to [2WAY].) (Page 5)
[REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier). (Page 34)
[DISPLAY]
[EASY MENU] When entering [FUNCTION]...
[ON]: [ZONE 1] illumination changes to white color. ;
[OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.
(Page 25)
• [ZONE 2] illumination changes to light blue color when you enter
[FUNCTION], irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 25 for zone identification.
[TUNER SETTING]
[DAB ANT POWER] [ON]: Supplies power to the DAB antenna. ; [OFF]: Does not supply
power. Selects when using passive antenna without booster. (Page 34)
[PRESET TYPE] [NORMAL]: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/MW/LW/DB1/DB2/DB3). ; [MIX]: Memorizes one
station (digital radio or analog radio) for each preset button, regardless
of the selected band.
[SYSTEM]
[KEY BEEP] (Applicable only if [X'OVER] is set to [2WAY].) (Page 5)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
Default: [XX]