Compass Zone Adjustment; Compass Calibration - Gentex NVS Manual

7

Compass Zone Adjustment

1. Adjust compass zone after EC mirror installation.
a) The zone setting is factory preset to Zone 8. Refer to Compass
Calibration Zone Map to find correct compass zone
setting for your geographical location. (Fig. 37)
b) To change the zone setting, push and hold the
approximately 9 seconds until a number appears in the display.
Press button repeatedly until desired compass zone number is
reached.
8

Compass Calibration

1. Calibrate compass.
a) Drive to an open, level area, away from large metallic objects or
structures.
b) Hold the
or "C" text appears in the display. Release the
enter the calibration mode.
c) Drive slowly in up to 3 circles until the "CAL" or "C" text
disappears, and a directional heading is displayed.
The compass is now calibrated.
Page 9 of 11
1
2
2
3
4
3
4
5
6
button for approximately 12 seconds until "CAL"
Revision A
5
1
6 7
1 1 2
8 9
0 1
1
9
8
7
button for
button to
1 5
1 4
1 4
3
1 3
1 2
1 1
1 0
37
550-0426