Table of Contents
Advertisement
Available languages
Available languages
This QS Series features 3 distinct modes of operation: QSET1 / QSET2 / CUSTOM. Each
setting is activated by cycling the UP or DOWN buttons.
QSET1 – This is the 1st Quick Set programming mode. When the camera is changed to the this
mode, the display screen will give a digital read out of the following:
st
1
nd
2
With this setting the camera is preprogrammed to take photos at MED resolution, a 30 second
timeout delay between activations and takes 1 photo every trigger activation.
QSET2 – This is the 2nd Quick Set programming mode. When the camera is changed to the
this mode, the display screen will give a digital read out of the following:
st
1
nd
2
With this setting the camera is preprogrammed to take a 10 second video, a 30 second
timeout delay between activations.
www.stealthcam.com
877-‐269-‐8490
CAMERA PROGRAMMING
- 9 Photo Delay – (Delay) Counts down from 9sec to 0sec
- rdY – (Ready) Camera is in a ready and active state
- 9 Video Delay – (Delay) Counts down from 9sec to 0sec
- rdY – (Ready) Camera is in a ready and active state
8
Page
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the FX SERIES and is the answer not in the manual?
Questions and answers
Settings Info won't display in window. Only "NOSDcard" dispays.. New batteries are installed (in proper plarity).
The Stealth Cam FX Series displays "NOSDcard" instead of settings info because there is no SD memory card inserted in the camera. The camera requires an SD card to store images and videos, and without one, it cannot function properly.
This answer is automatically generated
Why did the digital display stop working?