- The mains socket must be earthed and easily accessible at all times! - Use only the mains cable supplied with the device by DAHLE and ensure that it is not damaged! - Ensure that the building installation has short-circuit protection: max. 16 A (US max. 20 A)!
Page 3
- Document shredder on stand-by - Document shredder in operation - Automatic start-up - Oil (only use DAHLE oil!) - Dispose of the document shredder appropriately and in an environmentally friendly manner at an authorised collection point. Do not dispose of any parts of the document shredder or packaging in domestic waste.
3. Each time the appliance is moved, the transport lock must be re-fitted. 1. Oil the shredding rollers using DAHLE document shredder oil (P5, P6 and P7 cross-cut shredding only)!
Page 5
4 castors, brakes on the front Collection bin for CDs/DVDs and bank DAHLE document shredder oil bottle Spare cards/credit cards collection bin (P5, P6, P7 cross-cut shredding only) Wait 2–3 secs. after switching on at the main switch and then start the device using the On/Off/Stop button.
Page 6
General information Depending on the model variant, your document shredder may not have all the possible components and functions. Reverse button Motor jam with Forward button Waste bag full Door open Filter change Oiling On/Off/Stop button On indicator (LED illuminated) 1.
Page 7
Operation – shredding paper Please follow the safety instructions. 1. Prior to using the document shredder, please check the position of the collection bin for CDs/DVDs and bank cards/credit cards. When shredding paper, this bin must be at the front of the collection bin for paper.
Page 8
Operation - shredding CDs/DVDs and bank cards Depending on the model variant, your document shredder may not have all the possible components and functions. Please follow the safety instructions: Wear protective goggles when shredding CDs or DVDs! 1. Prior to using the document shredder, please check the position of the collection bin for CDs/DVDs and bank cards/credit cards.
Page 9
3. Change the fine dust filter on the rear of the appliance. A. Undo screw. B. Press catch and remove cover. C. Remove filter and dispose of it. The replacement filter that you fit must be a DAHLE fine dust filter! D. Close cover. E. Tighten screw.
Page 10
Fill the integrated oil tank in the document shredder when indicated on the display. 1. Switch off the document shredder with the On/Off/Stop button. 2. Open the door. The integrated oil tank is in the cabinet. Open the cap. 3. Fill oil tank with oil (use DAHLE document shredder oil!) and close again.
Page 11
Meaning of the signals Depending on the model variant, your document shredder may not have all the possible components and functions. Collection bin full – The LED is flashing. 1. 1. If the collection bin is full, the shredding process is stopped; this situation is indicated optically. 2.
Page 12
Meaning of the signals Depending on the model variant, your document shredder may not have all the possible components and functions. Automatic motor shut-down – The LEDs for the fill level and door are flashing. 1. Automatic motor shut down in case of: - Overheating of the motor - Paper jam Door open –...
Possible malfunctions Depending on the model variant, your document shredder may not have all the possible components and functions. The document shredder switches off automatically after extended operation and/or overload to cool down. Thermal cut-out The shredding process is not started: - Mains cable not plugged into the mains socket - Collection bin full - Main switch not on?
Page 14
Possible malfunctions Depending on the model variant, your document shredder may not have all the possible components and functions. 1. If there are too many sheets of paper, the shredding process is stopped. 2. The shredding mechanism automatically runs in reverse for a short time and the paper is ejected. 3.
Possible malfunctions Depending on the model variant, your document shredder may not have all the possible components and functions. Energy-saving mode If not used, the document shredder switches off after approx. 30 minutes (LED off). To use the document shredder, switch it back on with the On/Off/Stop button.
Maintenance and care Use only DAHLE spare parts! Oiling (P5 cross-cut shredding) If the shredding performance drops, oil the shredding mechanism after each time you empty the collec- tion bin or at least after the operating time stated in the warning notice has elapsed (for P5 cross-cut shredding only).
Page 17
Dahle North America, Inc. 49 Vose Farm Road Peterborough, NH 03458 (800) 995.1379 / www.dahle.com 16100-14172 BI DE 104-716AIR 05/2018...
Need help?
Do you have a question about the 41 Series and is the answer not in the manual?
Questions and answers