Warnings - HEIDENHAIN TT 460 Mounting Instructions

Warnings

注意事項
提示
警告
경고
Note: Mounting and commissioning is to be conducted by a qualified specialist under compliance
with local safety regulations.
注意：取付け及び試運転は設置国の安全規格のもとで有資格の専門家により実施するようにし
てください。
注意： 安装和调试时必须符合当地安全要求并由具有资质的专业人员操作
注意:安裝與調整要經由已認證的專業人員指導以符合當地安全規範要求。
주의: 설치 및 조정은 한국의 안전도 규정에 의하여 작업을 수행할 수 있는 공인된 기술자에 의해
수행되어야 합니다.
Calibrate the touch probe with the calibration cycle of the control before commissioning.
Calibrate the touch probe with the calibration cycle of the control before commissioning.
Calibrate the touch probe with the calibration cycle of the control before commissioning.
Calibrate the touch probe with the calibration cycle of the control before commissioning.
Calibrate the touch probe with the calibration cycle of the control before commissioning.
5