Table of Contents
Advertisement
SERVICE
Service Bulletin
AUTHOR
Last Update
VERSION
Reprogramming of Washer&Dryer appliance produced in Comunanza (Combo)
TITLE
Reprogramming of Washer&Dryer appliance produced in Comunanza (Combo)
SUBJECT
INVOLVED PRODUCTS: Whirlpool and Bauknecht Wash&Dryers appliances produced in
Comunanza factory.
GENERAL REQUIREMENTS
For main board programming, use one of the following tools:
- SMART READER (spare part code 482000021959 - C00272306) + SMART CARD.
- PC with MEMWRITER installed + HW KEY (USB, BLUETOOTH). Or the PDA (Windows
mobile 6.5) + HW KEY (only BLUETOOTH).
A) Use of SMART READER + SMART CARD
From the label extract the 12nc and the serial number. Search in WEDOC the SMART CARD
code and order it from the Spare Part Center. How to use:
1) Disconnect the appliance from supply and wait 5 minutes.
2) Insert the smart card into the smart reader.
3) Insert the smart reader inside the mainboard slot.
4) Connect the machine to the mains supply.
5) Programming sequence:
Permanent Red: smart reader power supply.
Flashing green: download in progress.
© Whirlpool EMEA
This document is only intended for qualified technicans who are aware of the respective safety regulations.
Whirlpool EMEA
Customer Service
4812 712 40417
Gabriele Cambiotti
30/05/16
1.0
Subject to modifications
Service Bulletin 481271240417
page 1 of 3
www.scc-service.com
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WWDE 7512 and is the answer not in the manual?
Questions and answers