Related Manuals for Aquael GLOSSY MARINE 100
Summary of Contents for Aquael GLOSSY MARINE 100
- Page 1 GLOSSY MARINE aquarium tank User manual AQUAEL Sp. z o. o. 16-400 Suwałki, Dubowo II 35, Poland www.aquael.com, e-mail: service@aquael.com...
-
Page 2: Specifications
GLOSSY MARINE aquarium tank Thank you for purchasing our product. We are confident that you will be satisfied with its operation. Prior to using the device, please read carefully the following instructions to avoid Thank you for purchasing our product. We are confident that you will be satisfied with its operation. - Page 3 Suggested circulating AQUAJET PFN 6000 ECO AQUAJET PFN 8000 ECO pump* Suggested circulator 4000, 6000, 8000 4000, 6000, 8000 pumps* *to be purchased separately; not included in the set! LIST OF PARTS (Fig. 1) The package should contain the following (Fig. 1): a) a GLOSSY MARINE aquarium set including the lid of the overflow box b) a protective mat to protect the bottom of the tank (sticked to the cabinet) c) a strengthened rack cabinet...
-
Page 4: Safety Precautions
Fig. 1. Components of the GLOSSY MARINE set SAFETY PRECAUTIONS The device has been manufactured in full accordance with the currently binding EU safety standards. To ensure safe operation and a long lifecycle of this product, carefully read the following safety rules: 1. - Page 5 under supervision or following an instruction on the safe operation of the device to ensure that the person is aware of any associated risks. The device is not a child's toy! Do not let children to clean or perform maintenance on the device without supervision. ASSEMBLY AND START-UP PREPARATION The GLOSSY MARINE aquarium set is delivered to the customer packaged in a cardboard box...
- Page 6 with the nozzle screwed into the piping union – may result in damage to the rear wall of the tank, rendering the set unusable. When screwing the LOCK-LINE nozzle into the piping union, it is best to carefully bend it towards the inside of the tank. The draining unit consists of a piping union that is passed through the left (bigger) aperture drilled in the bottom of the overflow box at the back of the aquarium (on the left side of a person standing behind the aquarium) and a ball valve mounted on the right (far) side of the sump (as...
- Page 7 Fig. 2. The assembly of plumbing components (viewed from the back of the aquarium).
- Page 8 Fig. 3. The assembly of couplers (used in the feeding and draining units)
- Page 9 SUGGESTED ADDITIONAL EQUIPMENT In order to ensure the proper operation of the aquarium and to provide optimum living conditions for its inhabitants, additional equipment is required. AQUAEL suggests the following devices to be used with the aquarium set: GLOSSY MARINE...
-
Page 10: Maintenance
2. Start the circulating pump. Use the adjusting knob to change the pump capacity so that there is a continuous flow of water between the sump and the main tank (the recommended pump capacity is approx. 60% of its maximum capacity). If the flow of water is accompanied by excessive noise, adjust the rate of its flow from the tank and into the sump using the large valve located on the plumbing of the draining unit above the sump. - Page 11 The guarantee is limited to repair or replacement of the unit only and does not cover consequential loss or damage to animate or inanimate objects. ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ AQUAEL Sp. z o. o. 16-400 Suwałki, Dubowo II 35, Poland www.aquael.com, e-mail: service@aquael.com...
Need help?
Do you have a question about the GLOSSY MARINE 100 and is the answer not in the manual?
Questions and answers