Driving
Speed limiter
System which prevents the vehicle from
exceeding the speed programmed by the
driver.
When the programmed speed limit is reached,
pressing the accelerator pedal no longer
has any effect unless it is pressed firmly,
which permits temporary exceeding of the
programmed speed.
To return to the programmed speed, simply
slow down to a speed below the programmed
speed by releasing the accelerator.
The speed limiter is switched on manually:
it requires a programmed speed of at least
20 mph (30 km/h).
The speed limiter is switched off by manual
switched off
switched off by manual
operation of the control.
The programmed speed remains in the memory
when the ignition is switched off.
The speed limiter cannot, in any circumstances,
replace the need to observe speed limits,
nor can it replace the need for vigilance and
responsibility on the part of the driver.
166
Steering mounted controls
The controls of this system are grouped
together on stalk A .
1.
Speed limiter mode selection dial
2. Programmed value decrease button
3. Programmed value increase button
4. Speed limiter on / off button
Displays in the instrument panel
The programmed information is grouped
together on the instrument panel screen.
5. Speed limiter on / off indication
6. Speed limiter mode selection indication
7.
Programmed speed value
This information also appears in the
head-up display.
For more information, refer to the
"Head-up display" section.
Need help?
Do you have a question about the 3008 and is the answer not in the manual?
Questions and answers