Advertisement
Quick Links
Shaw HD Box
Installation Instructions
What's in the box
Cable Cord
(Coax)
Shaw Remote
Hook up your new hardware
A.
Your serial number, "Host SN," is located on the back of the HD box (next to
the number three) and starts with the letter "M." Alternatively, you can find
the serial number on the white sticker label on the HD box packaging. You
can find your Account number on the mailing label.
Wall Outlet
Cable Out
(Approximate hardware setup time: 10 - 15 minutes)
Power Pack
Arris HD Box
Cable In
HDMI Cable
Serial number
B.
Find a location to put your new hardware
that will allow it to breathe.
C.
Screw one end of the included white cable
cord (with silver ends) into your wall cable
outlet and the other end into the back of the
HD box. For an optimal viewing experience,
we recommend using the included cable cord
instead of any others you might have around.
IR Receiver +
Tether Cord
(Optional Use)
Splitter
(Optional & not included
in all packaging)
Advertisement
Related Manuals for Arris DCX3200
Summary of Contents for Arris DCX3200
- Page 1 HDMI Cable IR Receiver + (Coax) Tether Cord (Optional Use) Shaw Remote Arris HD Box Splitter (Optional & not included in all packaging) Serial number Hook up your new hardware Your serial number, “Host SN,” is located on the back of the HD box (next to the number three) and starts with the letter “M.”...
- Page 2 Television Connect the included HDMI cable (black cable with flat gold ends) from the HD box to your TV. Both video and audio travel through HDMI cable. Note the input you plug your HDMI cable into on the back of your TV (i.e. HDMI 1, HDMI 2, etc.).
Need help?
Do you have a question about the DCX3200 and is the answer not in the manual?
Questions and answers