Page 1: Table Of Contents
Contents Introduction Important Information Before Use Product Identification Model: TS42B Description of LCD Display Battery Installation Setting °C/°F and Date/Time Tips for Measuring Human Temperature Measuring Body Temperature on the Forehead Measuring Body Temperature in the Ear Clinical Accuracy Validation Method...
Page 2: Introduction
Introduction Important Information Before Use for Use: When using this product, please be sure to follow all the notes listed below. Any action against these notices may The device is an infrared thermometer intended for the cause injury or affect the accuracy. intermittent measurement of human body temperature in 1.
Page 3: Product Identification
Product Identification Description of LCD Display...
Page 4: Battery Installation
Battery Installation Setting °C/°F and Date/Time Low battery warning: When the battery power becomes low, the low battery symbol will appear on the display. The thermometer can still be used during this time, but the batteries should be replaced as soon as possible. If the batteries run out completely, “Lo”...
Page 5: Setting °C/°F And Date/Time
Setting °C/°F and Date/Time Setting °C/°F and Date/Time When the thermometer is used for the first time and each 1. Changing from Fahrenheit to Celsius time the batteries are changed, the date and time are displayed in the format 1-1 00:00 during the basic set-up (1) Press the "SET"...
Page 6: Tips For Measuring Human Temperature
Setting °C/°F and Date/Time Tips for Measuring Human Temperature Bear in mind that the thermometer needs to have been in the room in which the measurement is taken for at least 30 minutes before use. • Some people produce different readings in their left and right ear.
Page 7: Measuring Body Temperature On The Forehead
Measuring Body Temperature on the Forehead Measuring Body Temperature in the Ear 1. Press the Power button for 1 second to switch the NOTE: thermometer on. Following a successful self test, the The forehead/temples must be free from sweat and device emits two short beeps.
Page 8: Clinical Accuracy Validation Method
Clinical accuracy validation method 6. To switch back to the thermometer mode, press the “Memory ” and “ SET ” buttons simultaneously for 3 TS42B is an adjusted mode clinical thermometer the validated information for clinical accuracy in each seconds until the “...
Page 9: Memory Function
Memory Function Care and Maintenance • Probe and Tip: You can recall up to 30 measurements plus an average of Clean the probe and tip with an alcohol swab before and all currently stored measurements in memory to share with after each measurement.
Page 10: Error Codes
10°C (50°F) Turn on the TS42B. The app should automatically detect your TS42B. Tap Operate the the TS42B that is showed in the device list. thermometer only The operating temperature between the Your TS42B is now successfully connected to your...
Page 11: Technical Specifications
Technical Specifications EMC Tables • Range of Measurement : Human Body: 35°C – 42°C (95°F – 107.6°F) Object Mode: 10°C – 100°C (50°F – 212°F) • Measuring accuracy : Human Body: 35°C – 42°C (95°F – 107.6°F) ±0.2°C (0.4°F) Object Mode: ±2°C(±4°F) or ±5% •...
Page 12: Emc Tables
EMC Tables EMC Tables...
Page 13: Explanation Of Symbols
FCC Statement Explanation of Symbols This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Notified Body (TÜV Rheinland) installation.
Page 14 72-T42MN-AV1 2015-09-03...