Table of Contents
Advertisement
Using the earphones
14 | MOMENTUM True Wireless
If you pair the earphones with the ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over-
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the earphones again.
Pairing the earphones with a Bluetooth
device
1
max. 50 cm
3
4
ON
ON
1. Take both earbuds out of the charging case and insert them into
your ears (> 16). The distance between the earbuds and the Blue-
tooth device should not exceed 50 cm.
2. Simultaneously touch and hold the right and the left touch control
panel for 5 seconds until you hear the voice prompt "Pairing" and
a beep.
The LEDs of the earbuds flash blue and red. The earbuds are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone
are displayed.
From the list of found Bluetooth devices, select "MOMENTUM
TW". If necessary, enter the default pin code "0000".
If pairing was successful, you hear the voice prompt "Pairing suc-
cessful" and the LEDs of the earbuds flash blue 3 times.
R
2
"Pairing"
Hold
5s
ON
MOMENTUM
TW
ON
paired +
connected
paired
"Pairing
successful"
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MOMENTUM True Wireless and is the answer not in the manual?
Questions and answers
Momentum True Wireless earbuds. Left side doesn't connect. Right side seems fine. App shows both sides fully charged. When I tried a factory reset, the app said to connect the left side first, but I can't do that.
If your left earbud of the Sennheiser MOMENTUM True Wireless is not connecting, try these steps:
1. Restart Bluetooth – Turn off Bluetooth on your phone for a few seconds, then turn it back on.
2. Reset the Earbuds – Place both earbuds in the charging case, close the lid for a few seconds, then open it.
3. Re-enter Pairing Mode – Remove both earbuds from the case, then press and hold both touch controls until the right earbud blinks blue and red, indicating pairing mode.
4. Reconnect to Your Device – Try pairing the earbuds again with your smartphone via Bluetooth.
If the issue persists, ensure the earbuds and charging case are charged by connecting them to a USB power source.
This answer is automatically generated